Two-dimensional steady-state heat conduction

Assignment Help Mechanical Engineering

Reference no: EM13710271

Using Finite Difference and Finite Element to Solve for Two-Dimensional Steady-State Heat Conduction

PROBLEM STATEMENT:

Using finite difference method solve for the following:

a) Temperature distribution in the block (provide color contour diagrams)

b) Temperature distribution along the top surface (present T vs x graphs)

PROVIDE>

1. Finite-difference equations used

2. Delta x = delta y (size) that was chosen to solve finite-difference equations (you may use matlab)

3. Code used to solve finite-difference equations

Reference no: EM13710271

Questions Cloud

Fourth-order polynomial passes through the five points : A fourth-order polynomial passes through the five points for which the independent and dependent variables, x and y, respectfully, are given (-2,37), (-1,7), (0,5),(1,13), and (2,61). Find the polynomial by any suitable method. Here, x represents the..

Determine the mass flow rate through the nozzle : Air enters a nozzle steadily at 2.21 kg/m^3 and 30 m/s and leaves at 0.762 kg/m^3 and 180 m/s. If the inlet area of the nozzle is 80 cm^2 determine a) The mass flow rate through the nozzle and b) The exit area of the nozzle.

Constant-volume process and pressure process : A piston-cylinder assembly contains 3 lb of water initially at 95 psi and 350 F. The water undergoes 2 processes in a series. First a constant pressure process and then a constant-volume process. At the end of the constant volume process the temperat..

Determine the change in kinetic energy : Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 4MPa. 500 degree Celsius and 80m/s and the exit conditions are 30kPa, 92 percent quality and 50m/s. the mass flow rate of the steam is 12kg/s. determine the chan..

Two-dimensional steady-state heat conduction : Using Finite Difference and Finite Element to Solve for Two-Dimensional Steady-State Heat Conduction. Temperature distribution in the block (provide color contour diagrams) Temperature distribution along the top surface (present T vs x graphs)

Tubular body for high-pressure coolant and a carbide tip : What drill has one set of flutes that are ground to more than one diameter? What drill category includes more than one set of flutes allowing multiple diameters? What drill type incorporates a tubular body for high-pressure coolant and a carbide tip?

Refrigeration cycle operating : A refrigeration cycle operating between two reservoirs receives energy QC from a cold reservoir at TC = 280 K and rejects energy QH to a hot reservoir TH = 330 K. For each of the following cases determine whether the cycle operates reversibly, irreve..

Refrigerant enters the condenser of residential heat pump : Refrigerant-134a enters the condenser of a residential heat pump at 900 kPa and 40°C at a rate of 0.02 kg/s and leaves at 900 kPa as a saturated liquid. If the compressor consumes 1.2kW of power, determine (a) the COP of the heat pump and (b) the rat..

Find the polynomial by any suitable method : A fourth-order polynomial passes through the five points for which the independent and dependent variables, x and y, respectfully, are given (-2,37), (-1,7), (0,5),(1,13), and (2,61). Find the polynomial by any suitable method. Here, x represents the..

User Account

All Pages