Estimate the cost of the structural fill

Assignment Help Civil Engineering
Reference no: EM131018141

Earthwork

A pit, 750' long, 80' wide, and 2' deep, needs to be filled and compacted with select structural fill in Seattle, WA. The swell factor is 20 percent, and the shrinkage factor is 15 percent. The soil is to be retrieved from a location 5 miles away. It will be compacted using sheepsfoot compactors.

Source: Modified from the textbook, Mubarak, S. (2012). How to estimate with RSMeans data: Basic skills for building construction (4th ed.). Hoboken, NJ: John Wiley.

Using the provided data and CostWorks, estimate:

The total volume of soil to be retrieved

The total number of 12-cubic-yard dump trucks needed, each loaded at 110 percent capacity

The total bare cost and the total cost, including overhead & profit (O&P) for the entire operation

Submission Requirements:

Submit the CostWorks format, including all the data and calculations used to estimate the cost of the structural fill.

Reference no: EM131018141

Questions Cloud

Write paper about relocation portion of termination : Write a two page paper about the "Relocation" portion of the Termination & Relocation policy - Briefly describe the mechanics, destinations, and results of Relocation
Estimate the bare cost of steel doors : Submit the CostWorks format, including all the data and calculations used to estimate the bare cost of steel doors.
Calculate the consumer and producer surplus : Calculate equilibrium price, quantity, consumer surplus and domestic producer surplus. Now imagine this country opens to free trade and the world price of steel is $500 per ton. Under free trade, calculate the consumer and (domestic) producer surp..
Estimate the bare cost of the diesel generator : Submit the CostWorks format, including all the data and calculations used to estimate the bare cost of the diesel generator.
Estimate the cost of the structural fill : Submit the CostWorks format, including all the data and calculations used to estimate the cost of the structural fill.
What will happen to the yield on 10 year treasury bonds : What interest rate would the bank have to charge to earn an expected rate of return on its loan equal to the T-bill rate - what would this indicate about investors expectations of future short term interest rates?
Estimate the total volume in thousand board feet of board : For a location in Oshkosh, WI, estimate the total volume, in thousand board feet (MBF), for 100 pieces of 2" x 8", 16-feet-long board by using CostWorks.
What is the anticipated price of eggs : Remember to show all of your work. Also remember that calculators are not permitted on exams, so you should try these by hand. Egg economists forecast that egg prices will rise 20% from 2012 to 2014. What is the anticipated price of eggs in 2014
Identify the genus and species of an unknown bacterium : Many bacteria appear identical to others when examined under a microscope, so a microbiologist uses characteristics of bacteria to narrow down the possibilities to eventually identify the genus and species of an unknown bacterium.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the concentration of fe3+ in pure water

Give a few examples of movable bridge designs, that build with a certain robotics toolkit (VEX) kit. Specify the dimensions of the bridge design and the materials needed to build it from a VEX kit.

  Compute dead load due to backfill that the pipe must support

A 300 mm diameter pipe is placed in a 3 m deep rectangular trench that is 0.60 m wide. The trench is backfilled with clay that has a bulk unit weight of 18.8 kN/m3. Compute the dead load due to backfill that the pipe must support.

  What is the hydraulic gradient

The bottom of piezometers A and B are on the same flow line and 1000 m apart. The bottom of piezometer A is at 130 m and its water level is 160 m. The bottom of piezometer B is at 100 m and the water level is 150 m.  What is the hydraulic gradient ?

  Determine vb of the load b after it has dropped 200 mm

A 40 kg sheave a OF RADIUS R=350 mm. and cenral radiusof gyration k=250 mm carries a 160 kg load b and is suspended by a cable and a spring of modulus k=1.2 kN/m.

  Compounds empirical and molecular formula

A Silane contains 90.31 % silicon and 9.69 % hydrogen by mass. The compound has a molar mass of 62 g/mol. Determine the compound's empirical and molecular formula.

  Determine the minimum guy lead length for the pole

The electric pole and the stub pole are at the edges of the roadway right-of-way. The anchor will be outside of the right-of-way and will require the subdivision to purchase land from the neighbouring farmer (who is VERY UNHAPPY about the subdivis..

  Ten kilograms of saturated liquid calculate the work done

Ten kilograms of saturated liquid water at 5 bar is heated in a piston-cylinder assembly at constant pressure until temperature reaches 400 degrees C.

  Find stresses in ab and bc and the displacement at point c

A bar is under uniform axial loads. AB is 1 foot and has a area of .5 in^2 and BC is 1 foot and has an area of .3 in^2. AB has a 1000lb force putting it under tension and BC has a 500lb force putting it under compression

  What is the specific weight of the hexagonal mass

a rectangular prism box which is floating on water has a length L =1200mm, breadth = 800mm, height = 500mm and mass of 52kg. when the box is loaded with the suspended hexagonal mass, its immersion is 300mm, and when it the mass is placed inside th..

  Design a cyclone that has a collection efficiency between 80

Design a cyclone that has a collection efficiency between 80% and 85% (use parcticle size distribution given below). you must assume a dpc of 4.2 microns,an inlet gas velocity of 25 m/s and a K of 15.The unit must handle 20,000 cfm of contaminated ..

  Determine the maximum shearing stress

A torque of magnitude T = 1000Nm is applied at D as shown. Knowing that the diameter of shaft AB is 56 mm and that the diameter of shaft CD is 42 mm, determine the maximum shearing stress in (a) shaft AB, (b) shaft CD.

  How long after the rope becomes taut until car b collides

The cars have equal mass. Car A is suddenly given velocity 4 m/s and the rope becomes taut. We know that 40 percent of the system’s kinetic energy is lost during the rope tensioning.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd