Determine the temperature of the air leaving the turbine

Assignment Help Civil Engineering
Reference no: EM131032889

An aircraft on the ground is to be cooled by a gas refrigeration cycle operating with air on an open cycle. Air enters the compressor at 30°C and 100 kPa and is compressed to 250 kPa. Air is cooled to 70°C before it enters the turbine. Assuming both the turbine and the compressor to be isentropic, determine the temperature of the air leaving the turbine and entering the cabin.

Reference no: EM131032889

Questions Cloud

Quality- oriented organization primary concern centers : Quality- oriented organization primary concern centers around
Identify the top most goal of human resource management : Identify the top most goal of human resource management
What change you recommend for brocks life insurance coverage : What changes would you recommend for the Brock's life insurance coverage? What types of mutual funds might be considered by the Brocks for their investment portfolio?
Added specific goal of human resource management : Identify which one is an added specific goal of human resource management
Determine the temperature of the air leaving the turbine : Assuming both the turbine and the compressor to be isentropic, determine the temperature of the air leaving the turbine and entering the cabin.
Specific goal of human resource management : Which one is not the specific goal of human resource management?
Explain some of the metrics the hr : Explain  some of the metrics the HR can employ to ensure improved customer services and ensure there is best customer services and satisfaction.
What is the area of the slab in square meters : The switchboard shown in this figure is 3 meters wide and 5 meters long and is placed on a concrete near a slab wall. What is the area of the slab in square meters
What would recommend to the process discussed in article : What would be the advantages and/or disadvantages of adopting the process described in the article? Why? What would you recommend to the process discussed in the article? Why?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what uniformly distributed load can be carried

A simple supported beam 6m long is composed of two C200x28 channel RIVETED FRONT TO FRONT . What uniformly distributed load can be carried in addition to the weight of the beam w/o exceeding a flexural stress of 125MN/m^2

  Estimate average hourly and average daily esidential sewage

Estimate the average hourly, average daily, and minimum hourly residential sewage flows from an area serving a population of 1500 people. Assume that the lenghth of sewer and house drains equals 3.0 km and that infiltration occurs

  What is the proportion of vehicles that will have to wait

At one of the entrances to the car parking area at the proposed new Mill project at Albion, a single line of vehicles approach a manually operated entry gate, where payment will be required to gain entry. The process of stopping at the payment ..

  Calculate ground-level concentration downwind and crosswind

At noon on a sunny summer day with a surface wind speed of 4m/s, SO2 is released over rough terrain from a 90m stack at a rate of 400g/s. Assume that the plume rise is 60m.

  Discuss in detail firm should put in place to make sure wish

Each of the three partners realizes that in order for the firm to continue at the present rate of growth a realistic business continuation plan must be in place which would include a viable buy-sell agreement between the shareholders.

  Comparative analysis of the types of safeguards

Provide a comparative analysis of the types of safeguards would you suggest for the company's information system.

  Note the wide u-shaped profile of the upper outer portion

1 were the designers aware that this valley was landslide-prone before they built the dam? what feature of fig. 1

  Characteristic between prehistoric and egyptian architecture

Characteristics between Pre-historic and Egyptian architecture and Egyptian and west Asiatic Architecture

  Determine the maximum displacement of the plate

Determine the maximum displacement of the plate A if the billet strikes the plate with a speed of 8 . Neglect the mass of the springs, rollers and the plates A and B. Take = 4000 , = 40000 .

  Find magnitude of load that is necessary to produce changes

An alloy has a yield strength of 41 ksi, a tensile strength of 57 ksi, and an elastic modulus of 16 X 10^6 psi. A cylindrical specimen of this alloy 0.5 in in diameter and 10 in long is stressed in tension and found to elongate 0.3 in.

  Calculate pump power equired to operate the heat exchanger

The heat exchanger consists of 12 m of copper tubing that is 2 cm in diameter with 19 return bends. The flow rate is 3 x 10-4 m3/s. Water enters at 20 C and exits at 80 C. The elevation difference between the entrance and the exit is 0.8 m.

  Determine the range of values for the probability

The current price of a company stock is $20.The company is a takeover target.If the takeover is successful.the company's stock price will increase to $30.If the takeover is unsuccessful.the stock price will drop to $12.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd