Determine magnitude and location of resultant force acting

Assignment Help Civil Engineering
Reference no: EM13309295

An open rectangular tanks is 3m wide and 4m long. The tank contains water to depth of 2m and oil (SG=0.8) on top of the water to a depth of 1m. Determine the magnitude and location of the resultant force acting on one end of the tank (i.e. 3m high by 3m wide).

Reference no: EM13309295

Questions Cloud

Complete the one-variable data table : As a student at USI and a member of the budget committee for theMadrigal Feaste, you have been given a partially completed workbook, MadrigalFeaste.xlsx, and asked to complete the project.
The adult client with musculoskeletal disorder : Annual direct and indirect costs for bone and joint health are 849 billion– 7.7% of the gross domestic product. You might think that cancer is the most dangerous illness affecting the global population but in reality, disorders that you might not be ..
Determine the specific gravity of the soil solids : A soil has a moisture content of 31.4%, a degree of saturation of 90% and a unit weight of 17.3kN/m^3. Determine the specific gravity of the soil solids.
Explain separation and purification scheme 50% toluic acid : separation and purification scheme 50% toluic acid, 40% fluorene, 10% 1,4-dibromobenzene
Determine magnitude and location of resultant force acting : The tank contains water to depth of 2m and oil (SG=0.8) on top of the water to a depth of 1m. Determine the magnitude and location of the resultant force acting on one end of the tank (i.e. 3m high by 3m wide).
Determine the angular momentum of the particle : The position vector of a particle of mass 2.10 kg as a function of time is given by rarrowbold = (6.00 ihatbold + 4.00 t jhat bold), Determine the angular momentum of the particle
What is the osmotic pressure of this protein solution : A membrane has pure water on one side of it, and a protein solution on the other side. The membrane has pores equivalent in size to a spherical molecule with a molecular weight (Mm) of 120,000 daltons.
Define disodium hydrogen phospate : What would happen to the A450 valure for a sample as test tube#10(is included 1ml of 0.0025M Fe(NO3)3 , 1ml of 0.0025M KSCN, and 5ml of 0.1M HNO3 ) ,if accidentally added 5 drops of disodium hydrogen phospate
Compare to the number of potassium ions within the cell : How many potassium ions must a cell lose in order to produce a membrane potential of - 95 mV for potassium? How does this compare to the number of potassium ions within the cell?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Derive the expression for reversible work

What is work? Why is it path dependant? Derive the expression for reversible work from a closed system containing a simple compressible substance.

  Determine the seepage velocity of water through aquifer

a) Calculate Darcy's velocity of the groundowater as well as the amount of water that passes through the aquifer each day. b) for the same aquifer, determine the seepage velocity of water through aquifer if the effective porosity is 32%.

  Determine the inlet and exit tempertures and exit quality

A steady flow of refrigerant 134a enters a throttling valve in a refrigeration unit as a satrurated liquid with a pressure of 150 psia. The refrigerant is discharged with a pressure of 40 psia.

  Determine the specific weight and total moisture content

A sample of dry sand with a specific gravity total of 16.49 kN/m3 and a relative density of 2.67 grains, is placed outdoors. During a rainy period, the sample volume remains constant but the degree of saturation increases to 40%.

  Calculate the air flow required in cfm to transfer

Calculate the Air flow required in CFM to transfer 5,396 BTU/Hour in an HVAC duct given that the temperature difference (Delta-T) between the room and the supply air is 21 DegF.

  Calculate the precentage of carbon hydrogen and oxygen

Calculate the precentage of carbon hydrogen and oxygen in ethanoic acid.

  Determine what is the minimum standard size that is needed

a mountain water reservoir in a national park is to provide water at a flow rate of Q= 200 gpm and a minimum pressure of 40 psig in the lodge of the valley 200 ft below the reservoir.

  Determine the magnitudes of the lift and drag

The forces acting on the sailplane are represented by three vectors. The lift L and drag D are perpendicular. The magnitude of the weight W is 500 lb. If the magnitude of the resultant of the three forces is 0

  Determine the maximum number of large trucks and buses

The traffic stream consists of cars, buses, and large trucks (no recreational vechicles). A weekday directional peak-hour volume of 1800 vehicles (familar users) is observed, with 700 arriving in the most congested 15 min period.

  Define deflection of a beam

Deflection of a Beam, If a beam of lenght L is fixed at the ends and loaded in the centre of the beam by a point load of F newtons the deflection

  Determine what is the discharge in cubic feet per second

A 2 foot tall multi-stage weir placed in a channel to cause the water to flow over the contracted weir at a height of 0.75 feet. There are 2 contractions and the original length is 6 feet. What is the discharge, in cubic feet per second

  Determine the pressure within the tank using psf as unit

A water-filled U-tube manometer is used to measure the pressure inside a tank that contains air. The water level in the U-tube on the side that connects to the tank is 5 ft above the base of the tank.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd