Determine horizontal and vertical components of the force

Assignment Help Civil Engineering
Reference no: EM13315123

A 2ft diameter hemispherical plexiglass "bubble is to be used as a special window on the side of an above-ground swimming pool. The window is to be bolted onto the vertical wall of the pool and faces outward, covering a 2ft diameter opening in the wall. The venter of the opening is 4ft below the surface. Determine the horizontal and vertical components of the force of the water on the hemisphere.

Reference no: EM13315123

Questions Cloud

Caculate the acceleration of the system : An object of mass 2.5 kg on a table is connected to a hanging object of mass 11.2 kg by means of a string via a pulley. Caculate the acceleration of the system
Find the bond''s value when interest is paid semi-annually : Bond valuation: Lahey Industries has outstanding a $1,000 par-value bond with an 8% coupon interest rate. The bond has 12 years remaining to its maturity date.
Provide sql statements to create the database : Provide SQL statements to create the database and populate it with sample data (at least four rows per table).
Parallel series electric blasting circuit consists : A parallel series electric blasting circuit consists of five branches of six caps each. Holes are spaced 10ft (3.05m) apart in a rectangular pattern, Cap legwire length is 24ft (7.3m).
Determine horizontal and vertical components of the force : The window is to be bolted onto the vertical wall of the pool and faces outward, covering a 2ft diameter opening in the wall. The venter of the opening is 4ft below the surface.
What is the disposition hearing : What is the disposition hearing and the role of the disposition report in that hearing?
Determine the safety factor of the wire against breaking : The length of the wire is 7,000 m, the weight density of the steel is 78 kN/m3 and its ultimate stress is 620 MPa. Find the safety factor of the wire against breaking from its own weight.
Determine by trigonometry the required tensoin t2 : determine by trigonometry (a) the required tensoin T2 in the left hand portion if the R of the force exerted by the cable at A is to be vertical, (b) the corresponding magnitude of R.
Calculate the rock yield : Calculate the rock yield (volume per hole) and the amount of drilling required per unit volume of excavation for blastholes placed in a staggered pattern on 8ft (2.4 m) centers. A drilled depth of 20 ft (6.1m) yields an effective depth of 18 ft (5.5m..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Which design checks that are performed on a clarifier

which design checks that are performed on a rectangular clarifier are not performed on a circular clarifier

  Does the f per m the mlvss concentration and srt change

A complete mix activated sludge plant operates at design Q, with the reactor tank volume set by a nominal= 6 hours.. a) It was anticipated that it would operate at 25% RAS for an expected Xr= 2,000 mg/l. What would the actual be

  Determine the tsp emission rate of the power plant

On a clear summer afternoon with a wind speed of 3.20 m/s measured at 100 m elevation, the TSP (total suspended solids) concentration was found to be 1520 ug / m3 at a point 2 km downwind

  What is the percent decrease in the cross-sectional area

a circular aluminum tube of L=600 mm is loaded in compression by forces P. The outside and inside diameters are d2=75 mm and d1=63mm, respectively. A strain Gage is placed on the outside of the tube to measure normal strains in the longitudinal di..

  Determine the magnitude-the direction and angle alpha

For the vector 100i+150j-300k kN determine its magnitude, the direction, angle alpha, beta, and gamma and the unit vector. magnitude = 350 kN angle alpha is suppose to = 59 degrees

  Magnitudes of fac and fad

The 70 m tall tower is supported by three cables that exert forces FAB, FAC, and FAD on it. The magnitude of the force FAB is 2 kN. The x and z components of the vector sum of the forces exerted on the tower by the three cables are zero. What are ..

  How many gallons of water per cubic yard should be added

given moisture contents of 5%, 9%, 14%, 22% and 25% with corresponding weights of 3.1, 3.42, 3.78,3.85, 3.77 lbs. of the compacted soil. (specific gravity =2.7)(compaction test using compaction mold of 1/30 ft^3).

  Determine the relative humidity using psychrometric chart

The wet bulb and dry bulb temperatures for humid atmospheric air (at 100 kPa) are measured to be 20 C and 25C respectively. Determine: a. using the psychrometric chart, the relative humidity  b. using the psychrometric chart, the humidity ratio

  Design a curve for highway by stationing of the pc and pt

A horizontal curve is being designed for a new two-lane highway(12-ft lanes). The PI is at station 250 + 50, the design speed is 65 mi/h, and a maximum superelevation of 0.07 ft/ft is to be used.

  What is the so2 concentration at a sampling point located

If the effective stack height of the plant is 100 m, and the ground reflects the SO2 emission perfectly what is the SO2 concentration at a sampling point located 2 m above the ground in the town.

  Determine the maximum acceleration from rest

A rear-wheel-drive car 2600 lb, has an 80-inch wheelbase, a center of gravity 20 inches above the road surface and 30 inches behind the front axle, a drivetrain efficiency of 85%, 14-inch-radius wheels,

  What volume of sludge must digester dispose of each year

WHat volume of sludge must they dispose of each year if their sand drying beds yield a solids concentration of 35%

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd