User Account

All Pages

You are designing a remote-area power supply based on a

Assignment Help Mechanical Engineering
Reference no: EM13627121

You are designing a remote-area power supply based on a miniature wind turbine that is 20% efficient. Meteorological data indicates an average wind speed of 24 km/h at an air temperature of 10oC and pressure of 0.9 atm. The rotor has a diameter of 1.25 m. What is the electrical power available?

Reference no: EM13627121

Questions Cloud

A point is chosen at random from the region s in the : a point is chosen at random from the region s in the xy-plane containing all points xy such that -4 lt x lt 4 -1 lt y
Ships a and b leave port together for the next two hours : ships a and b leave port together. for the next two hours ship a travels at 15.0 mph in a direction 35.0 west of north
Suppose that the number of murders in detroit follows a : suppose that the number of murders in detroit follows a poisson distribution with a standard deviation of 22 murders in
Determine the initial and final temperatures of the helium : the volume of 1.5 kg of helium in a piston-cylinder device is initially 9 m3. now the helium is compressed to 5 m3
You are designing a remote-area power supply based on a : you are designing a remote-area power supply based on a miniature wind turbine that is 20 efficient. meteorological
A hammer slides down a roof that makes a 40 degree angle : a hammer slides down a roof that makes a 40 degree angle with the horizontal. what are the magnitudes of the components
Pitchers mounds are raised to compensate for the vertical : pitchers mounds are raised to compensate for the vertical drop of the ball as it travels a horizontal distance of 17 m
Calculate the volume and total internal energy of water at : 10 kg of superheated water vapor at 200 acircdegc and 1.2 mpa is condensed isobarically to a saturated mixture with a
The skiers mass is 550 kg and the coefficient of kinetic : a skier is pulled up a slope at a constant velocity by a tow bar. the slope is inclined at 23.0deg with respect to the

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Question 1 a mild steel bar 40 mm diameter and 100 mm long

question 1. a mild steel bar 40 mm diameter and 100 mm long is subjected to a tensile force along its axis.youngs

  Find the force f required to hold the plug in place at the

find the force f required to hold the plug in place at the exit of the water pipe. the flow rate is 1.5 m3s the

  Refridgerant 410a is initially at 120 f and quality of 30

refridgerant 410a is initially at 120 f and quality of 30. it undergoes a constant-pressure process. the final state is

  Stoichiometrically how many kg of methanol are required for

biodiesel is produced from vegetable or animal oils. usually the glycerine in the oil is replaced by methanol. since

  Plot the lift and drag forces exerted on an airfoil

Plot the lift and drag forces exerted on an airfoil as a function of velocity. Use velocity values going from 0 to 45 m/s on a log-linear plot (log-scale on the y axis).

  Estimate the largest possible force in n that can be

a circular bar of radiusr 1 cm is placed horizontally between two vertical supports that are separated by distancel

  Given an aerodynamic body you have learned in aerodynamics

given an aerodynamic body you have learned in aerodynamics and flight mechanics how to apply the numerical source panel

  Determine for the cycle the mass flow rate of steam

water is the working fluid in a regenerative rankine cycle with one closed feedwater heater and one open feedwater

  Determine how much load this boat can carry without sinking

The hull of a boat has a volume of 150 m3, and the total mass of the boat when empty is 8560 kg. Determine how much load this boat can carry without sinking (a) in a lake and (b) in seawater with specific gravity of 1.03.

  What is the velocity of the collar

The system is at rest in the position shown, with the 12-lb collar A resting on the spring (k = 20 lb/ft), when a constant 30-lb force is applied to the cable. What is the velocity of the collar when it has risen 1 ft? The collar is attached to th..

  Two charges -18 c and 49 c are fixed in place and separated

two charges -18 c and 4.9 c are fixed in place and separated by 4.2 m. a at what spot along a line through the charges

  Plot data using appropriate dimensionless groups

Assume that viscous effects are negligible Plot this data using appropriate dimensionless groups

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd