Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A burglar alarm is designed so that it senses four input signal lines. Line A is from the secret control switch, line B is from a pressure sensor under a steel safe in a locked closet, line C is from a battery-powered clock, and line D is connected to a switch on the locked closet door. The following conditions produce a logic 1 voltage on each line.
A : The control switch is closed.
B : The safe is in its normal position in the closet.
C : The clock is between 1000 and 1400 hours.
D : The closet door is closed.
Write the switching expression for the burglar alarm that produces a logic I (rings a bell) when the safe is moved and the control switch is closed, or when the closet is opened after banking hours, or when the closet is opened with the control switch open.
A cam is to be desinged for an automated part loader.Using the motion equations,construct a chart that tabulates follower displacement versus time and cam rotation. Also plot this data when the prescribed motion for this application.
Determine the supply voltage E. Find the load resistors RL2 and RL3. Determine the voltage divider resistor R1, R2, and R3.
Write a program to compute the average of an array of N 8-bit numbers and store the result at $1001. The array is stored at memory locations starting from $1010. N is no larger than 255. Assume N is stored in the memory location $1000.
Design by direct implementation the electronic circuits for equations as the following logic equations using any real 1, 2, or 3 input logic gates. Assume all signals are high true (positive logic) and do not simplify the equations.
There are two 100μF capacitors. One is charged to an initial voltage of 50V and the other to an initial voltage of 100V. They are then placed in series with the positive terminal of the first connected to the negative terminal of the second.
Steam enters a reversible, adiabatic (isentropic) turbine at 8 MPa and 550 oC with a mass flow rate of 3.6 kg/sec. The pressure of the steam flow at the turbine exit is 250 kPa. Neglect the changes in potential and kinetic energies of the flow thr..
two resistors with nominal values of 4.7K ohm and 10K ohm, are used in a voltage divider with a +15V supply to create a nominal +10V output. Assuming the resistor values to be exact, what is the actual output voltage produced
an ac generator with a frequency of 150hz and an rms voltage of 22.5v is connected in series with a 15.0 kilo ohms
Develop the physical ladder diagram for a motor with the following: NO start button, NC stop button, thermal overload limit switch opens on high temperature, green light when running, red light for thermal overload.
An alternator with a line voltage of 2,400 volts supplies a delta connected load. The line current supplied to the load is 40 amperes. Assuming the load is a balanced three-phase load, what is the impedance of each phase
isible light passes through a diffraction grating that has 900 slits per centimeter, and the interference pattern is observed on a screen that is 2.58 m from the grating. In the first-order spectrum, maxima for two different wavelengths are separat..
A transistor has a current gain of 150 and a base current of 30 μA. What is the collector current?
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd