Write down an expression for the voltage waveform

Assignment Help Electrical Engineering
Reference no: EM131165071

Answer all questions showing all working out to show how answer was obtained.

1. For the circuit given in FIGURE 1 the power factor is 032 lagging and the power dissipated is 375 W.

7_Circuit_Diagram.jpg

FIG. I

Determine the:

(i) apparent power
(ii) reactive power
(iii) the magnitude of the current flowing in the circuit
(iv) the value of the impedance Z and state whether circuit is inductive or capacitive.

2. A 50 kW load operates from a 60 Hz 10 kV rms line with a power factor of 60% lagging. Determine the capacitance that must be placed in parallel with the load to achieve a 90% lagging power factor.

3. A series RLC circuit is connected to a 5 V supply, the frequency of the supply is adjusted to give a maximum current of 11.9 mA at 2.5 kHz. The Q factor is 70. Determine the component values of the circuit.

4. A single phase transformer has the following rating: 120 kVA, 2000 V/100 V, 60 Hz with 1000 primary turns.

Determine:

(a) the secondary turns
(b) the rated primary and secondary currents
(c) the maximum flux
(d) given a maximum flux density of 0.25 T, the cross-sectional area of the core.

5. An a.c. voltage, V, comprises of a fundamental voltage of 100 V rms at a frequency of 120 Hz, a 3rd harmonic which is 20% of the fundamental, a 5th harmonic which is 10% of the fundamental and at a phase angle of 1.2 radians lagging.

(i) Write down an expression for the voltage waveform.
(ii) Sketch the waveforms of the harmonic components.
(iii) Determine the voltage at 20 rns.
(iv) Given an ideal V= 100 V rms, what is the percentage error at 20 ms?

Reference no: EM131165071

Questions Cloud

Most effective and ineffective ways : In your opinion, what're the most effective and ineffective ways for managers to motivate employees?
Government policies to manage external effects effective : What are the external effects ( externalities ) and why they can lead to inefficiencies and government intervention in the markets . Why are some government policies to manage external effects effective ( efficient ) while others are inefficient ( in..
Assignment on marketing strategy : A firm that markets a drink called Trace Water has hired you to develop its marketing strategy. See http://www.tracenatural.com/ for more information.
What influences consumer behaviour : Prepare a report about one product or service containing information that could be used for a marketing plan - You can choose a product/service from your own business or from another business with which you are familiar.
Write down an expression for the voltage waveform : Write down an expression for the voltage waveform. Sketch the waveforms of the harmonic components. Determine the voltage at 20 rns. Given an ideal V= 100 V rms, what is the percentage error at 20 ms?
How do seizure requirements relate to investigative process : How do search and seizure requirements relate to the investigative process? What are the legal guidelines? What problems might be encountered? When is a warrant necessary and why? In what ways can a defense attorney attack search and seizure issues a..
Monopolist produces product which has high investment cost : A monopolist produces a product which has high investment cost. The marginal cost of the product is very small ( negligible ) . The monopolist has a patent for the product. Show in a chart the price of goods that would arise if the company is unregul..
Company strategy writing the plan : Models and best practices for reaching the target audience Developing recommendations to ensure alignment with company strategy Writing the plan and setting expectations Implementing the plan, proven best practices for implementing Tools for evalu..
How the flow under the sheet pile varies : Suppose there is a problem with the exit gradients. as in Problem 7-45. One solution would be to place a horizontal filter over the soil where the water exit

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is the highest frequency the controller can follow

what is the highest frequency the controller can follow?

  Find the mutual inductance between the two coils

A toroidal core has a rectangular cross section defined by the surfaces a = 2 cm, b = 3 cm, z = 4 cm, and z = 4.5 cm. The core material has a relative permeability of 80. The core is wound with two coils having N1 = 1000 and N2 = 2500 turns of wir..

  Define law of junction

Explain about the term cut-in voltage associated with pn junction diode. -How do you obtain cut-in voltage from forward V-I characteristics?

  Determine synchronous speed and number of stator poles

A 100 hp, 3 phase induction motor, operating at the rated load, runs at 423 rpm when connected across a 450 V, 60Hz supply. The slip at this load is 0.06. Determine A). Synchronous Speed B). Number of stator poles

  What are the values of the rise time and response time

A thermometer, initially at a temperature of 75 degrees Fahrenheit is suddenly immersed into a tank of water with a temperature of 180 degrees Fahrenheit. The time constant of the thermometer is 4 s.

  What is the minimum sampling frequency to sample the signal

A bandlimited signal with maximum frequency of 3.3 kHz, what is the minimum sampling frequency to sample this signal. If a sinusoidal signal of 7 kHz is sampled by this sampling frequency, what is the frequency of the alias

  What channel length must the mos cascode amplifier have

In a MOS cascode amplifier, the cascode transistor is required to raise the output resistance by a factor of 40. If the transistor is operated at Vov = 0.2 V, what must its Va be. If the process technology specifies V'a as 5 V/um, what channel len..

  Identify the motivation of the authors

Briefly summarize the main results of the paper and the main conclusions of the paper. Is this mainly an experimental paper (where real, physical measurements are the main results of the paper), or a theoretical paper (where the main results are f..

  Why the noise level is much lower than the signal

A signal is sampled every 1ms for 20ms, with the following actual values of the analogue voltage at successive sampling times. Plot the values of the voltage recorder by a 5 volt, 4 bit ADC assuming that the noise level is much lower

  Determine the mean and variance of the random variable

Consider a random variable that obeys a uniform desist and varies from 2 to 5. a). Determine the mean and variance of the random variable. b). what is probability that the random variable is between 2 and 3

  Does the load absorb or generate magnetizing vars

A load consisting of a 480 ohms resistor in parallel with a (5/9) uF capacitor is connected across across the terminals of a sinusoidal voltage source Vg, where Vg=240cos5000t V. a) What is the peak value of the instantaneous power delivered by the..

  Use nodal analysis to find va and vb in the network

Using nodal analysis find the output voltage VO  in fig.1-  Use nodal analysis to find VA and VB in the network in fig 2.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd