Write a c program that takes as input two lists of integers

Assignment Help Electrical Engineering
Reference no: EM13284937

Objective:

Write a C program that takes as input two lists of integers (in increasing order) and creates combines the numbers in third list of ordered numbers. The two input lists shall be read from separate text files and the combined list shall be written to an output file.

Specifications:

1. The files that the program uses will have the following names: "Data1.txt", "Data2.txt", and "Merged.txt". Note: Your program will be used with the grader's data files. If your program does not use the correct file names, then it will not run successfully.

2. The program will check for failures opening the files and will provide a graceful exit if a failure exists.

3. The program will have appropriate programmer-defined functions so that the main function provides a highlight of the program.

4. The program will have a comment block at the top of the file with your name, the course number, the date the program was completed, and a brief description of the program.

Note: You are not allowed to read all of the data into a single array and use a sorting function. Try to think of a more efficient approach.

Reference no: EM13284937

Questions Cloud

Find an expression for the bullets initial speed : You have been asked to design a "ballistic spring system" to measure the speed of bullets. Find an expression for the bullet's initial speed
The decomposition of no2 is second order in the reactant : If a vessel containing NO2 has an initial concentration of 2.8 x 10-2 mol/L, how long will it take for 75 of the NO2 to decompose? The decomposition of NO2 is second order in the reactant and the rate constant is 1.1 L/mol x s.
What is the implied nominal interest rate on a 10-year u.s. : What is the implied nominal interest rate on a 10-year U.S. T-notes ($100,000) futures contract that settled at 100'24 (or 100-240)? Assume a 6% semiannual coupon.
When the ice cube is released : A 58 ice cube can slide without friction up and down a 28 slope. The ice cube is pressed against a spring at the bottom of the slope, When the ice cube is released
Write a c program that takes as input two lists of integers : Write a C program that takes as input two lists of integers (in increasing order) and creates combines the numbers in third list of ordered numbers. The two input lists shall be read from separate text files and the combined list shall be written ..
Calculate carmen break-even point : Carmens president, Lacy, expects an annual profit of $260,000. How many games must be sold to attain this profit?
Find the attenuation factor of fog of electromagnetic wave : A laser beam traveling through fog was obseved to have an intensity of 1w/m^2 at a distance of 2 meters and intensity of 0.2 w/m^2 at a distance of 3 meters. Knowing that the intensity of an Electromagnetic wave is proportionel to the square of it..
Construct two financing plans-one conservative : Construct two financing plans-one conservative, with 65% of assets financed by long-term sources, and the other aggressive, with only 30% of assets financed by long-term sources.
What rate of return must each successful project pay : George lends $200,000 for each new idea. George's history is that he selects low-risk projects or ideas that hit 80% of the time. What rate of return must each successful project pay George for him to break even?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What are the short circuit current and open circuit voltage

If the mechanical power sent out from the machine is 100 kW at a rotating speed of 90% of the nominal speed. Compute the slip of the machine and find the power dissipation due to the rotor winding resistance.

  Prove that the potential cannot have a minimum space

Prove that the potential cannot have a minimum in an uncharged region of space. Prove therefore that a point charge cannot be in stable equilibrium under the action of electrostatic forces in an uncharged region.

  What is the highest gain available under the conditions

A non inverting op-amp circuit with a gain of 96 V/V is found to have a 3-dB frequency of 8 kHz. For a particular system application, a bandwidth of 24 kHz is required. What is the highest gain available under these conditions

  What is the base-emitter voltage of the latter transistor

In a particular technology, a small BJT operating at vBE = 28VT conducts a collector current of 100 µA. What is the corresponding saturation current. For a transistor in the same technology but with an emitter junction that is 32 times larger.

  Identify the number of required jk d-flip flop

Design a counter that will execute the numerical sequence 0, 2, 4, 6,repetitively. Unwanted states should be directed into wanted states that give the simplest logic functions. - Identify the number of required JK D-FLIP FLOP;

  Write truth table of a half adder with inputs a and b

Write Truth Table of a Half Adder with inputs A and B and output Sum and carry. How many 2-input NAND gates are required to realize this function. If a ROM is used to realize this function what is the size of ROM

  What amount voltage is required to obtain the field

Electrons in silicon carbide have a mobility of 1000 cm^2/V-sec. At what value of the electric field do the electrons reach a velocity of 3 X 10^7 cm/s Assume that the movility is constant and independent of the elctric field.

  Determine the voltage regulation for each field current

A dc separately excited generator runs at 1200 rpm. the rated current and voltages are 100 A at 240 V. The armature resistance is 0.15 (ohms). The open circuit magnetization characteristics at 1200 rpm are

  Finite-difference time-domain method

The Finite-Difference Time-Domain (FDTD) method is a computational electromagnetic technique for solving for the electric and magnetic fields in arbitrary spatial domains in the time domain

  Draw the equivalent circuit of the transformer

The O.C and S.C test data are given below for a single phase, 5 kVA, 200V/400V, 50Hz transformer. O.C test from LV side:200V 1.25A 150WS.C test from HV side:20VV 12.5A 175W

  Determine what would be the voltage in the capacitor at t

Suppose that a current x(t) = e^-0.5t for t > or equal to 0, and zero otherwise is applied to a discharged capacitor of capacitance C =1F at t = 0 sec. What would be the voltage in the capacitor at t= 1 seconds

  Determine circular convolution of 7 between x1 and x2

Let x1[n] = {-2,1,-3,-5,6,8} with arrow under -2 and x2[n]={1,2,3,4} with arrow under 1. a) determine circular convolution of 7 between x1[n] and x2[n] b) verify (a) calculations by computing the DFTs and IDFT.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd