Work for first process and heat transfer for second process

Assignment Help Mechanical Engineering

Reference no: EM13708840

Air is compressed adiabatically from p1 = 100 kPa, T1 = 300 K to p2 = 1500 kPa, v2 = 0.1227 m3 /kg. The air is then cooled at constant volume to T3 = 300 K. Assuming ideal gas behavior and neglecting kinetic and potential energies, calculate the work for the first process and the heat transfer for the second process, each in kJ per kg of air.

Reference no: EM13708840

Questions Cloud

Water flows across flat plate at a velocity : Water at 20 C flows across a flat plate at a velocity of 0.25 m/s. compute the distance from the plate’s leading edge to where the laminar boundary layer thickness is 3 cm. Verfiy that the flow is indeed lamiar at this distance.

Water in thermal equilibrium-trailing edge of the plate : Water in thermal equilibrium with a 50 C plate flows across the plate at a velocity of 0.5 m/s. find the length of the plate required such that the critical Reynolds number is achieved at the trailing edge of the plate.

Determines work done and heat transfer : For the cylinder-piston shown, piston is initially resting on the lower stops. The cylinder contains 1 kg of water at 1 bar and x = 0.64. A pressure of 3 bars is required to move the piston. The system is now heated until the water reaches 600° C.

Water undergoes a cycle composed : A system consisting of 1 kg of water undergoes a cycle composed of the following processes: constant-volume heating from p1 = 500 kPa, T1 = 160°C to p2 = 1000 kPa. constant-pressure process to saturated vapor.

Work for first process and heat transfer for second process : Air is compressed adiabatically from p1 = 100 kPa, T1 = 300 K to p2 = 1500 kPa, v2 = 0.1227 m3 /kg. The air is then cooled at constant volume to T3 = 300 K. Assuming ideal gas behavior and neglecting kinetic and potential energies, calculate the work..

Determine the final equilibrium pressure : An ideal gas is confined to one side of a rigid, insulated container divided into equal volumes by a partition. The other side is initially evacuated. The following data are known for initial state of the gas: p1 = 300 kPa, T1 = 380K and V1 = 0.025 m..

Specimen of this material elongate when a true stress : For some metal alloy, a true stress of 345 MPa (50040 psi) produces a plastic true strain of 0.02. How much will a specimen of this material elongate when a true stress of 417 MPa (60480 psi) is applied if the original length is 470 mm (18.50 in.)? A..

Stress necessary to plastically elongate a specimen : A cylindrical specimen of a metal alloy 48.0 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 368 MPa causes the specimen to plastically elongate to a length of 53.5 mm.

What is the potential difference across each capacitor : Capacitors C1=12micro Farad and C2=28microFarad are each charged to 15V , then disconnected from the battery without changing the charge on the capacitor plates. The two capacitors are then connected in parallel, with the positive plate of C1 connect..

User Account

All Pages