Why the current is actually going in the opposite direction

Assignment Help Electrical Engineering
Reference no: EM13258235

if the equation for a mesh current is done and the current comes out negative, with the assumed clockwise direction. does that mean that the current is actually going in the opposite direction?

Reference no: EM13258235

Questions Cloud

Explain the ph of this solution be after the addition : You have 500.0 mL of a buffer solution containing 0.20 M acetic acid (CH3COOH) and 0.30 M sodium acetate (CH3COONa). What will the pH of this solution be after the addition of 20.0 mL of 1.00 M NaOH solution? [Ka = 1.8 ´ 10-5]
Write a verilog hdl module for the state machine : Create a state transition diagram for a simple state machine to detect a positive pulse. You choose either a Moore or Mealy machine. Write a Verilog HDL module for your state machine.
Calculating the cost of inventory : Which of the following Method is suitable for computing the cost of inventory when actual costs of individual units of merchandise can be determined from the accounting records?
Determine the correct year-end amount of the total assets : Use the following schedule, determine the correct year-end amount of the (1) total assets (2) total liabilities, (3)owners' equity, and (4) net income.
Why the current is actually going in the opposite direction : if the equation for a mesh current is done and the current comes out negative, with the assumed clockwise direction. does that mean that the current is actually going in the opposite direction
Find the magnitudes of the velocity : A particle which moves with the curvilinear motion has coordinates in millimeters which vary with the time t in seconds according to x = 2t^2 - 4t and y = 3t^2 - (t^3)/3.
Systematic allocation of depreciable amount : Which of the following is the systematic allocation of the depreciable amount of an intangible asset over its useful life?
Explain what is the molar concentration of silver ion : What is the molar concentration of silver ion in a solution containing 1.3 x 10-4 M CrO42-, saturated with Ag2CrO4
The injury occurred in the workplace : Karen is an employee at a national church foundation, and recently stopped dating John, who also works at the foundation. John has been stalking Karen, and last week he finally delivered on his threat to hurt her - by shooting her in her office with ..

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is the probability that two chips are defective

A box contains a shipment of N (N>4) computer chips, of which four are defective. Four chips are randomly selected and examined as to wether or not the chips are defective. Describe the sample space for this experiment.

  What is the phase angle of the impedance of a capacitor

1- What is the magnitude of the impedance of a capacitor of 29 F at an angular frequency of 644 rad/s (1 decimals in ) 2- What is the phase angle of the impedance of a capacitor of 40 F

  Explain signal-conditioning output

An LVDT is used in an accelerometer to measure seismic-mass displacement. The LVDT and signal-conditioning output is 0.31mV/mm with +/-2cm maximum core displacement.

  Determine the output voltage when the input code is given

Independent of circuit details, for a digital input code of (b1, b2, b3, .... bn), the output of an n-bit digital to analog conversion output is of the form output = K (b1 + (b2/2)+ (b3/4)...+(bn/ 2^n-1)) For a particular 5 bit DAC the output volta..

  With what speed do waves travel across the cord

A 2.5 meter long elastic cord is fixed at both ends. a) If the cord is vibrated at a frequency of 35-Hz, a n=3 standing wave is produced. with what speed do waves travel across the cord.

  Design a series resonant circuit to have a bandwidth

Design a series resonant circuit to have a bandwidth of 400 Hz using a coil with a Ql of 20 and a resistance of 2 ohm. Find the values of L and C and the cutoff frequencies.

  Find value of vov nd vgs required to cause device to operate

(a) Find Cox and (b) For an NMOS transistor with W/L = 15 m/0.25 m, calculate the values of VOV , VGS, and VDSmin needed to operate the transistor in the saturation region with a dc current ID= 0.8mA.

  Find the values of c and r for the filter

An engineer intends to study an input signal with frequency components of 5, 6, and 10 kHz. It is desired that all other frequencies be filtered out. Design an appropriate filter, using L= 210mH and the MINIMUM bandwidth. Find C and R.

  Find equivalent impedance of transformer of low-voltage

A 3-phase 230 V, 9 kVA, 0.9 PF (lagging) load is supplied by 10 kVA, 1330/230 V, 60 Hz three-phase transformer connected in Y-?. The equivalent impedance of transformer referred to the low-voltage side is 0.12 + j0.25.

  Determine the total power supplied by the source

The total power delivered to a balanced, Y-connected, three-phase load is 720 kW at a lagging power factor of 0.8. The line voltage at the load is 3463 V. The impedance of the transmission line is 2.5 + j10.2 ohm. a) Determine the line voltage at ..

  An ac sine wave is applied to the input of a full wave

An AC sine wave is applied to the input of a full wave rectifier. The output of the full wave rectifier is then applied to a half wave rectifier.

  What is the rms voltage of square wave

A square wave has a max value of 22 volts, a min value of -46 volts, and a frequency of 44 Hz. Note that it is not centered around the t-axis. what is its rms voltage?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd