Why do you think it is important to control the position

Assignment Help Mechanical Engineering
Reference no: EM13624285

Why do you think it is important to control the position of a DC motor? Provide two examples for position control of electric motors.

Reference no: EM13624285

Questions Cloud

The landing speed of an airplane is dependent on the air : the landing speed of an airplane is dependent on the air density. by what percentage must the landing speed be
A 20 microfarad capacitor is connected in series with a 160 : a 20 microfarad capacitor is connected in series with a 160 ohm resistor. the capacitor is initially charged to a
What are the mean and standard deviation of their : 15000 monodisperse particles are released simultaneously and allowed to settle in still air for 5 min. if the particles
The distance between an object and its image formed by a : the distance between an object and its image formed by a diverging lens is 8.70 cm. the focal length of the lens is
Why do you think it is important to control the position : why do you think it is important to control the position of a dc motor? provide two examples for position control of
An orthopedic called mend-a-bone is made of an : 1. an orthopedic called mend-a-bone is made of an extracellular matrix extract plasticized with glycerol mw92 to help
The poll results show that 12 of the men and 33 of the : an institute constructed a poll of 1014 adults 48 of whom were men. the poll results show that 12 of the men and 33 of
Calculate the apparent distance between the image of the : the back wall of a home aquarium is a mirror that is a distance of 46.0 cm away from the front wall. the walls of the
Why do materials that have the same composition and : why do materials that have the same composition and crystal structures have the same modulus of elasticity e

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the cop of the device when extracting thermal

a thermoelectric unit consists of n cells. when there is no temperature difference across the leads the resistance is 4

  The chute is deployed is -0000180v2 speed v in feet per

the 244000-lb space-shuttle orbiter touches down at about 230 mihr. at 193 mihr its drag parachute deploys. at 35 mihr

  Determine the air velocity

A Pitot-static probe connected to a water manometer is used to measure the velocity of air. If the deflection (the vertical distance between the fluid levels in the two arms) is 7.3 cm, determine the air velocity. Take the density of air to be 1.2..

  A piston-cylinder arrangement holds a thermally perfect gas

A piston-cylinder arrangement holds a thermally perfect gas at p1=100kPa and T1 = 300K. Assume that cp = 1.0035 kJ/kg-K, cv = 0.7165 kJ/kg-K, and R = 0.287 kJ/

  Determine the temperatures of surface 1 through 4 of the

determine the temperatures of surface 1 through 4 of the furnace cavity of example 13.3 if the entire furnace

  Calculate the force required in direct extrusion of 1100-o

calculate the force required in direct extrusion of 1100-o aluminum y105 mpa from a diameter of 100mm in to 50mm.

  The sphere is cooled by 20oc air with a convection heat

a 20 cm diameter sphere is made of a heat-generating material that produces 106 wm3. the sphere is cooled by 20oc air

  The retarding force due to the fluid is proportional to the

a pendulum consisting of a bob of mass m is suspended from a massless inextensible string of length l in a viscous

  The temperature on the inner face is 25 degrees celcius and

a brick wall 3 m high 7.5 m wide and 200 mm thick has a thermal conductivity of 0.7 wmcelcius. the temperature on the

  3 kg of r22 in a piston-cylinder is initially at a pressure

3 kg of r22 in a piston-cylinder is initially at a pressure of 0.30 mpa and volume of 0.15m3. the system is then heated

  Find the final condition of steam

Steam at 10bar and 0.95 dry flows at 130 m/sec in a pipe. It is throttled to 8 bar and the flow rate is 12 kg/sec. Assuming velocity in the pipe on the down stream side of the valve is 160 m/sec. Find the final condition of steam and the pipe diam..

  What is the difference between the pressure inside a soap

what is the difference between the pressure inside a soap bubble and atmospheric pressure for a 3-in-diameter bubble?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd