Which resistor has the most current through it

Assignment Help Electrical Engineering
Reference no: EM131213381

A circuit has the following resistors in parallel with a voltage source: 220 k Ω, 100 k Ω, 82 k Ω, 47 k Ω, and 22 k Ω. Which resistor has the most current through it? The least current?

Reference no: EM131213381

Questions Cloud

What is the sum of all three branch currents : There is a total current of 2.5 mA into a node and the current out of the node divides into three parallel branches. What is the sum of all three branch currents?
What is your batna : What bargaining strategy will you use in your negotiations with your potential business partner? Justify your approach with supporting evidence from research.
Draw a block diagram of the combined reactor flash unit : Process Control Assignment Case Study - Reactor-Flash unit. Draw a block diagram of the combined reactor+flash unit (see Figure 3) showing the transfer functions which describe how the flowrate of w4 and concentration of stream 4 (x4A) is affected ..
Discuss some of basic tenets of african traditional religion : Discuss some of the basic tenets of African Traditional Religions. How do those relate to Christianity and Islam? How did African people make Christianity and Islam more reflective of their traditions?
Which resistor has the most current through it : A circuit has the following resistors in parallel with a voltage source: 220 k Ω, 100 k Ω, 82 k Ω, 47 k Ω, and 22 k Ω. Which resistor has the most current through it? The least current?
How much current is there through the resistor r : In a certain transistor amplifier circuit, the transistor can be represented by a 10 mA current source, as shown in Figure 31. In a certain transistor amplifier, two transistors act in parallel. How much current is there through the resistor RE?
Role of a desktop support professional : Create an 8- to 12-slide Microsoft® PowerPoint®training presentation that would be used to educate new members of your company's desktop support team about their role and their responsibilities related to appropriate operational controls and proc..
Which factors had the greatest impact on pre-pueblo cultures : In your judgment, which of the following factors had the greatest impact on the pre-Pueblo cultures of New Mexico Choose only "ONE" factor from the list below and argue/defend your position.
Is the information provided by reliable sources : Evaluate whether the new information is based on reliable sources and whether the information is relevant to the issue. Explain your position on the case study issue from the perspective of the role you are assuming and how this new information inf..

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find the probability for the occurence of each event

three coins are tossed. Describe the following events: A. at least two heads occur. B. At most one head occurs. C. Exactly two heads occur. D. No heads occur Find the probability for the occurence of each event.

  Explain how to derive three expressions for the phase angle

Draw an accurate phasor diagram of the four voltages from the R-L-Ccircuit. Derive three expressions for the phase angle between Vsand Vr from the phasor diagram.

  What value of excitation current will be required

The cross-sectional area of each of the outer limbs is 0.0004m2 and each with a mean path length of 0.2m. The cross-sectional area of the centre limb 0.0008m2 and has a mean path length of 0.08m. A 308-turn coil is wound on the centre limb. What va..

  Find voltage v1 for which the diode just starts to conduct

Given the following circuit, in which R1 = 200 (Ohm), R2 = 100(Ohm), V1 = 6 V, and V2 = 3 V. Assume the diode turn-on voltage is 0.7 V. Find the current through the circuit. Find the voltage V1 for which the diode just starts to conduct.

  What is the magnitude of the electric field at midway point

Two point charges of +3.0μF and -7.0μF are placed at x=0 and x=0.20m. What is the magnitude of the electric field at the midway point between them

  Find the largest allowable signal swing at the collector

Find the largest allowable signal swing (peak-to-peak) at the collector to satisfy the two conditions: BJT remains active , and vbe limited to 5 mV . What is the corresponding allowable peak-to-peak input voltage vi

  Sketch and label each of the following signals

Sketch and label each of the following signals

  What line voltage is needed so that the lamps burn normally

Three incandescent lamps rated 60 W, 120 V are connected is delta. What line voltage is needed so that the lamps burn normally

  Determine the required user signal power to achieve ber

In a multiuser CDMA system of DSSS, all transmitters are at equal distances from the receivers. The additive white Gaussian noise density Sn(f) = 5x10^-7 W/Hz. BPSK is used by all users with bit rate = 16 kb/s. There are 16 users.

  Calculate ni and the concentration of electrons

an unknown semiconductor has Eg=1.1ev and Nv=Nc.it is doped with 10^15 donors,where the donor level is 0.2ev below Ec. given that Ef is 0.25ev below Ec, calculate ni and the concentration of electrons and holes in the semiconductor at 300k.

  Design an amplifier capable of providing the specified gain

Design an amplifier capable of providing the specified gain over a frequency range of 20 Hz to 10Khz under the following conditions. Input source is 2700ohms resistive, and the output load impedance is 32ohms resistive.

  Find the permittivity of a parallel-plate capacitor

Find the permittivity of a parallel-plate capacitor if its capacitance is 100 ?F, the dimension of each rectangular plate is 1cm by 0.5cm, and the distance between the plates is 1mm.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd