Which generator exceeds its ratings first

Assignment Help Electrical Engineering
Reference no: EM131203151

Three physically identical synchronous generators are operating in parallel. They are all rated for a full load of 100 MW at 0.8 PF lagging. The no-load frequency of generator A is 61 Hz, and its speed droop is 3 percent. The no-load frequency of generator B is 61.5 Hz, and its speed droop is 3.4 percent. The noload frequency of generator C is 60.5 Hz, and its speed droop is 2.6 percent.

(a) If a total load consisting of 230 MW is being supplied by this power system, what will the system frequency be and how will the power be shared among the three generators?

(b) Create a plot showing the power supplied by each generator as a function of the total power supplied to all loads (you may use MATLAB to create this plot). At what load does one of the generators exceed its ratings? Which generator exceeds its ratings first?

(c) Is this power sharing in (a) acceptable? Why or why not?

(d) What actions could an operator take to improve the real power sharing among these generators?

Reference no: EM131203151

Questions Cloud

Identify the current gaps or challenges encountered : HI5019 STRATEGIC INFORMATION SYSTEMS - Each student will write a literature review of NOT more than 1500 words. The review should demonstrate that the student has thoroughly researched their topic. Students should use examples of business practice..
How fast would the shaft of the generator have to rotate : The first ac power system in the USA ran at a frequency of 133 Hz. If the ac power for this system were produced by a 4-pole generator, how fast would the shaft of the generator have to rotate?
Did anything about five year violent crime offense figure : Discuss the general trends that you see on Tables 4 and 6 as to where in the country violent crime is trending up or down. Identify the areas such as "Northeast", "South" or name the states and what the trends seem to be.
Application of superconductivity in the commercial sector : Find at least one article on the application of superconductivity in the commercial sector, and write a short summary, including all interesting facts and figures.
Which generator exceeds its ratings first : If a total load consisting of 230 MW is being supplied by this power system, what will the system frequency be and how will the power be shared among the three generators?
Research the squid magnetic field detector : Research the SQUID magnetic field detector and review its basic mode of operation and an application or two.
What is the approximate increase in size : What is the approximate increase in size from a 1-W to a 2-W carbon resistor? - What is the approximate increase in size from a 1/2-W to a 2-W carbon resistor?
Why you chose that particular program and individual : Contact the program or individual, and explain that you want to conduct an informational interview for your class assignment. Then schedule the interview.
Calculate the saturated synchronous reactance : If the armature resistance is 0.3 ? per phase, and the generator supplies 60 A to a purely resistive Y-connected load of 3 ? per phase at this field current setting, determine the voltage regulation under these load conditions.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine the rms value of the voltage

Suppose that a voltage given by v(t) = 45 sin(100pt- 70°) is applied to a 9 O resistance. Sketch v(t) to scale versus time (make sure to put the labels on graph). Find the rms value of the voltage.

  Find the wattmeter reading and the inductance of the coil

The inductance of an air core coil is 0.08H, and the effective resistance is 4 ohms when a 60V, 50Hz source is connected across the coil. Find the current passing through the coil and the reading of a watt meter across the coil.

  How does earth''s magnetic field change over time

Describe the impact of adjustment to stress (strain) on the surface of the Earth.

  Calculate the energy stored in the medium of coaxial cable

A coaxial cable consists of an inner conductor of radius 1.2cmand an outer conductor of radius 1.8cm. The two conductorsare separated by an insulating medium (μ =4μo). If the cable is 3m long and carries25mA current, calculate the energy stored in..

  Show the truth table for 3 input odd parity circuit

Show the truth table for the following circuits: a. A 3 input NAND GATE (Inputs are A,B, and C and the output is Q) b. A 3 input odd parity circuit. (Inputs are A,B, and C and the output is Q) c. A two bit adder with inputs (A1,A0 and B1,B0) and outp..

  What are the direction of the total electric force

Point charge 1.5{\rm \mu C} is located at x = 0, y = 0.30 {\rm m}, point charge -1.5{\rm \mu C} is located at x = 0 y = -0.30 {\rm m}. What are (a)the magnitude and (b)direction of the total electric force that these charges exert on a third point..

  Determine the values of each resistor

a series parallel circuit with a 3V dc power source connected to 3 resistors. R1 and R2 are in series with the voltage source and R3 is in parallel with R2. It is given that 4amps is flowing through R1 and 2amps is flowing through R2.

  What is the synchronous speed of the motor

The synchronous speed of a 60Hz, three-phase induction motor is 1200rpm. What is the synchronous speed of the motor if it is used in a 50Hz system?

  Design a series-parallel combination of a capacitor bank

A capacitor bank is required that can be charged to 5 kV and store at least 250 K of energy. Design a series/parallel combination that meets the voltage and energy requirements using 20-μF capacitors each rated at 2 kV max.

  What is the number of channels per cell

A total of 33 MHz are allocated to a system which uses 2x25 kHz for full duplex (i.e., each channel is 50 kHz). What is the number of channels per cell?

  Determine the rate of energy destruction

A 1000-W iron is left on the ironing board with its base exposed to the air at 20°C. If the temperature of the base of the iron is 150°C, determine the rate of energy destruction for this process due to heat transfer, in steady operation.

  Find the motor speed when the armature current is 2a

A separately excited 300V DC motor has an armature resistance of 1ohm and a field resistance of 100 ohm. The field Voltage is 200V. The no load speed is 1200 rpm and no load armature current 2A

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd