When the rope is at an angle of a 20 the 05 kg sphere a

Assignment Help Mechanical Engineering
Reference no: EM13632700

When the rope is at an angle of a = 20? the 0.5 kg sphere A has a speed v0 = 1.2 m/s. The coefficient of restitution between A and the 1 kg wedge B is 0.8 and the length of rope l = 0.8 m. The spring constant has a value of 500 N/m and ? = 20?. Determine:

a) The velocity of A and B (magnitudes and directions) immediately after the impact.

b) The maximum distance wedge B travelled within its enclosure after gaining momentum during impact, assuming no friction between the wedge and top wall, the kinetic friction coefficient between the wedge and the bottom wall is coefficient of friction = 0.15

c) The energy lost due to the impact.

d) Determine the tension in the rope at the highest location.

Reference no: EM13632700

Questions Cloud

Two structural members a and b are riveted to a bracket : two structural members a and b are riveted to a bracket. angle iron a is at 20 deg fro perpendicular with a compression
If the management decided to use the standard hour plan as : in a workshop three workers are doing similar continuous work which is turning and threading a cylindrical steel bar. a
In a mechanical coal-washing process a portion of the : in a mechanical coal-washing process a portion of the inorganic sulfur and ash material in the mined coal can be
A pipeline has been proposed to carry natural gas 1715 : a pipeline has been proposed to carry natural gas 1715 miles fro alaskas north slope to calgary alberta canada. the
When the rope is at an angle of a 20 the 05 kg sphere a : when the rope is at an angle of a 20? the 0.5 kg sphere a has a speed v0 1.2 ms. the coefficient of restitution
What is the entropy generation of the process fix the : a 3 kg piece of steel is removed from an oven at 700c and placed a water bath.the final temperature of the water is 80c
Ethane gas is burned in a steady-flow process with 30 : ethane gas is burned in a steady-flow process with 30 excess air both of which enter separately at 25 0 c and 1 atm.
A 045 kg mass vibrates according to the equation x 049 cos : a 0.45 kg mass vibrates according to the equation x 0.49 cos 8.45t where x is in meters and t is in seconds.a
The combustion of methane gas ch4 with air leads to the : the combustion of methane gas ch4 with air leads to the following volumetric analysis of the product gases on a dry

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Calculate the enthalpy change of the universe

calculate the enthalpy change of the universe during the process. Cp=Cv = 4.18 kj/kgK

  The average plate temperature of a at plate of length l

the average plate temperature of a ?at plate of length l with constant heat ?ux with air at 20? c ?owing over it at a

  What is the boundary work associated with this process

energy addition in polytropic process in this case the initial air pressure is 750 psia and 750 f. the polytropic

  What is the stagnation pressure and mach number of flow

you are designing a converging-diverging nozzle to operate at sea level. the nozzle will be mounted on a glider that

  A line containing nitrogen at 540or and 75 psi is connected

a line containing nitrogen at 540or and 75 psi is connected to a turbine that exhausts to an initially empty closed

  If the convective heat transfer coefficient is 135 w m2k

a long beer can made of thin a1 sheet l 1 cm k 205 wmk is removed from refrigerator and set on a table air temp

  A condenser condenses saturated water vapor at 100 kpa to a

a condenser condenses saturated water vapor at 100 kpa to a saturated liquid. the steam enters at 3 ms and exits at 100

  A gondola on a ski lift is supported by two bent arms as

a gondola on a ski lift is supported by two bent arms as shown in fig. 3. each arm is offset by the distance b180 mm

  Find an expression for the torsional constant k in terms of

a thin metal disk of mass m2.00 x 10-3 kg and radius r2.20cm is attached at its center to a long fiber. when the disk

  Determine the total heat transfer and the total work

Determine the total heat transfer and the total work(kj). and show the T-V diagram.

  Calculate the length of the conveyor belt shown b calculate

the crate containing 40 bricks sits on a slopped conveyor belt which is used to raise the crate to the next level of

  Estimate the convective heat-transfer coefficient for

estimate the convective heat-transfer coefficient for natural convection from a horizontal steam pipe. the outside

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd