What temperature will be indicated by the thermocouple

Assignment Help Mechanical Engineering
Reference no: EM131171345

A thermocouple sensor is enclosed in a metal sheath having a surface emissivity of 0.7, and placed in a large oven, the walls of which are maintained at 600?C. The air temperature in the oven is 350?C, and the convection coefficient between the air and the sensor is 40 W/m2 · ?C. What temperature will be indicated by the thermocouple?

Reference no: EM131171345

Questions Cloud

Calculate the true temperature of the air : Athermometer having an emissivity of 0.9 is placed in a large room and indicates a temperature of 25?C.The walls of the room are at 35?C and the convection heat transfer coefficient is 5.0 W/m2 · ?C. Calculate the true temperature of the air.
Differences between design capacity and effective capacity : Analyze two or three (2-3) differences between design capacity and effective capacity, and then predict one or two (1-2) challenges that you may encounter when using each method. Provide specific examples to support your rationale
Statement that describes the overall purpose of organization : A mission statement is a formal statement that describes the overall purpose of the organization and what it intends to achieve in terms of customers, products, and resources. Write a mission statement for a breakfast/brunch restaurant that is only o..
Two complement system : In a two's complement system, what value can be added to any other value without causing an overflow? How many values in the system have this property? Explain your answer.
What temperature will be indicated by the thermocouple : The air temperature in the oven is 350?C, and the convection coefficient between the air and the sensor is 40 W/m2 · ?C. What temperature will be indicated by the thermocouple?
Explain an analysis on apixs assets liabilities and profit : I would like for you to complete a presentation. However, I want you to keep it simple and clear. Using all 3 Financial Statements, please provide an analysis on Apix's assets, liabilities, cash, and profit.
Future technologies to be used in presentations : Write about three(at least 350 words for each) future technologies to be used in presentations and on the use of social media in presentations.
Improvement being made to increase the quality of healthcare : Write first page with introductory paragraph and your thesis statement on the topic "Improvements being made to increase the quality of healthcare".
Client side logic to wap using wmlscript : What is the process of adding the client side logic to WAP using WMLScript?

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The inital parameters of the air in the cylinder were 10 l

air was heated by an electric resitance heater in an insulated piston-cylinder device. the piston weight remained

  Refrigerant 134a is compressed at steady state from 24 bar

refrigerant 134a is compressed at steady state from 2.4 bar 0oc to 12 bar 50oc. refrigerant enters the compressor with

  Design a network and vpn

Design a Network and VPN 1.Design a VPN between offices in Chicago, New York, and Washington D.C. Each site has 200 users.2.Explain how to connect the three LANs.

  Is there any height h for which flow might not be laminar

Water at 20°C is to be siphoned through a tube 1 m long and 2 mm in diameter, as in Fig. P6.14Is there any height H for which the flow might not be laminar? What is the flow rate if H =50 cm? Neglect the tube curvature.

  Determining the maximum allowable power

What is the maximum allowable power if the chip is flush mounted in a substrate that provides for an unheated starting length of 20 mm?

  Calculate the mass flow rate through the two-stage turbine

Steam enters a two-stage adiabatic turbine at 8 MPa and 550ºC (State 1) and is expanded to 2 MPa (State 2) in the first stage of expansion. This steam is reheated at constant pressure to 550ºC (State 3) before entering the second stage of expansion. ..

  Determine the maximum height to which the jet rises

Water at 20°C, in the pressurized tank at 75 kPa gage, flows out and creates a vertical jet as shown. Assuming steady frictionless flow: Determine the maximum height H to which the jet rises

  What are the work and heat transfer for this process

A 100L rigid tank contains nitrogen (N2) at 900K, 3 MPa. The tank is now coole to 100K. What are the work and heat transfer for this process?

  Compute the solidification time of a 0.5 inch by 8inch

calculate the mold constant B. Then compute the solidification time of a 0.5inch by 8inch by 8inch casting poured under the same conditions?

  Compute and plot the steady-state temperature

The surface radiative properties depend on the spe- cific nature of the applied coating. Compute and plot the steady-state temperature as a function of the emissivity for 0.05 s 1, with all other conditions remaining as prescribed. Repeat your calc..

  A particle moves along the curve yx2 - 4m with a constant

a particle moves along the curve yx2 - 4m with a constant speed of 5 ms. determine the point on the curve where the

  Structure of the laminar flow temperature boundary layer

Based solely on the flow correlation above and your knowledge of the structure of the laminar flow temperature boundary layer, derive the rate of growth of the boundary layer δ(x)

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd