What magnetic field should be applied to trap electrons

Assignment Help Mechanical Engineering

Reference no: EM13212850

In a DC planar magnetron sputtering system at 1000 V, the cathodeanode spacing is 10 cm. What magnetic field should be applied to trap electrons within 0.5 cm of the target?

Reference no: EM13212850

Questions Cloud

Determine the angle through which end d of shaft cd rotates : In the gear-and-shaft system shown, the shaft diameters are dab= 2 in. and dcd=1.5 in. Knowing that G = 11.2 x10^6 psi, determine the angle through which end d of shaft cd rotates.

Determine the acceleration of the car : Motor M draws in the cable with an acceleration of 4 ft/s2, measured relative to the 200-lb mine car. Determine the acceleration of the car and the tension in the cable. Neglect the mass of the pulleys.

What is corporate risk management : What are the advantages and disadvantages of using forwards versus exchange-traded futures contracts in implementing a risk management strategy designed to address the problem of commodity price risk?

What strategies could be used to counteract the increased : What strategies could be used to counteract the increased Nitric oxides emissions with ethanol blended petrol?

What magnetic field should be applied to trap electrons : In a DC planar magnetron sputtering system at 1000 V, the cathodeanode spacing is 10 cm. What magnetic field should be applied to trap electrons within 0.5 cm of the target?

Calculate the total out-of-pocket cash you will spend : You are going to borrow $350,000 for a term (number of years) corresponding to 20 at a 6% interest rate. Calculate the following: a) The monthly payment b) The total out-of-pocket cash you will spend to completely pay off the loan

Draw the projections of rod showing curves of intersection : A connection of rod of 50 mm diameter has a rectangular block 50 mm wide and 25mm thick forged at its end. A turned radius of 25 mm joins the rod and the block. Draw the projections of the rod showing curves of intersection.

Define- hydraulic mean radius : Define- hydraulic mean radius, hydraulic dept, section factor and most efficient dhannel cross section.

What is the elastic modulus of elasticity : a standard steel specimen of 13 mm diameter elongated 22 mm when it was subjected to a tensile force of 29.5 kN if the specimen has a length of 200 mm and that force applied within elastic range. what is the elastic modulus of elasticity ?

User Account

All Pages