What kvar of capacitors is required to operate the turbine

Assignment Help Electrical Engineering
Reference no: EM131127975

A 2000-kW turbine-generator of 0.85 power factor operates at the rated load. An additional load of 300 kW at 0.8 power factor is added. What kVAR of capacitors is required to operate the turbine -generator but keep it from being overloaded?

Reference no: EM131127975

Questions Cloud

Does the duration of the latent period change : Does the duration of the latent period change with different stimulus voltages? How well did the results compare with your prediction?
What is the rankine cycle efficiency : What will be the efficiency of the engine if its volume is doubled? Question 2 Ten kilogram of Helium (assuming ideal gas) is used for a Carnot cycle. The cycle is 60% efficient and the heat transfer to the gas during the isothermal expansion is 4..
Determine the impedance of the heater : An industrial heater has a nameplate which reads: 210 V 60 Hz 12 kVA 0.78 pf lagging
How are lipids classified based on solubility : Giving examples of steroids and phospholipids with biological functions, define phospholipids and steroids. How are lipids classified based on their solubility?
What kvar of capacitors is required to operate the turbine : What kVAR of capacitors is required to operate the turbine -generator but keep it from being overloaded?
Which country undertakes this intervention : Under fixed exchange rates, if Britain becomes more productive relative to the United States, what foreign exchange intervention is necessary to maintain the fixed exchange rate between dollars and pounds? Which country undertakes this intervention?
Which company uses its fixed assets more efficiently : Compute the fixed asset turnover for each company. Round to two decimal places
The experimental oblique wing aircraft : The experimental Oblique Wing Aircraft (OWA) has a wing that pivots, as shown in Figure P8.17. The wing is in the normal unskewed position for low speeds and can move to a skewed position for improved supersonic flight [11]. The aircraft control s..
Determine the power factor (lagging) of the motor : Determine the power factor (lagging) of the motor. Find the value of the capacitance C that must be connected across the motor to raise the pf to unity.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find the value of burnt resistor

How to find The value of Burnt Resistor ( By three handy Methods ) ?

  What is the value of gm-ro of a common-source amplifier

A common-source amplifier utilizes a MOSFET for which VA=12.5 V and is operated at VOV = 0.25V. What is the value of its (gm ro). The amplifier feeds a load resistance RL = 15K ohm. The designer selects RD=2 RL.

  Determine the transfer function for a first order filter

Determine the transfer function for a first order low pass filter with a cutoff frequency of 1000 radians per second and passband gain of 1 using Chebyshev type with 1-dB ripples on the passband.

  What are the distinctions between the ways each one is used

explain the use of the Op Amp as a difference amplifier and as a comparator. What are the distinctions between the ways each one is used.

  What is the total charge that accumulates on the capacitor

The total charge that has accumulated on the positive plate of a capacitor varies with time. The charge follows q=At^2 for the first 4s. a) Find the value of current at t=2,6,9,12,16 s. b) Sketch the current i(t) as a function of time

  Calculate the total apparent power supplied by the source

A three-phase transmission line having a reactance of 120 ohms per phase is connected to a wye-connected load whose resistance is 160 ohms per phase. If the supply volatge is 70kV line-to-line, calculate a) The line-to-neutral voltage per phase.

  What advantage does the common drain amplifier

What advantage does the Common Drain amplifier with respect to common emitter amplifie. What has the disadvantage Common Drain amplifier with respect to common emitter amplifier

  Determine under what condition value of ts makes x periodic

Consider an analog periodic sinusoid x(t) = cos (3*pi*t + pi/4) being sampled using a sampling period Ts to obtain the discrete time signal x[n] = x(t)I t=nTs = cos (3*pi*t + pi/4). a.) Determine the discrete frequency of x[n].

  In which state is encoder after the sequence in is written

Using the convolutional code and Viterbi algorithm, assuming that the encoder and decoder always start in State 0,determine: a) The output string generated for the input: 00101101 b) In which state is the encoder after the sequence in a is written

  Should willy set the current limit to 8 amperes

Willy has also noticed that the power supply has a current limit that can be set. When he sets the current limit to 8 amperes, it provides exactly 8 amperes, but it doesn't overheat, so it's not shutting off all the time.

  Find the velocity of an electron with the fermi energy

The fermi level for the conductor is 5.6e.V. There are 5.8x1028 free electrons /m3. Find the (a) mobility and relaxation time of electrons ,(b)Average drift velocity of the electrons when the applied electricfield is 1.5 V.- cm-1, (c)Mean free pat..

  Determine the resistor length in cm cross-sectional area

A material with a bulk resistivity of p = 120 Om is to be used to manufacture a 75 kO resistor that must dissipate P = 80 W of power. The maximum allowable current density for this material is J = 120 A/m2.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd