What is the voltage regulation of the transformer

Assignment Help Electrical Engineering
Reference no: EM13967228

1. When travelers from the USA and Canada visit Europe, they encounter a different power distribution system. Wall voltages in North America are 120 V rms at 60 Hz, while typical wall voltages in Europe are 220-240 V at 50 Hz. Many travelers carry small step-up / step-down transformers so that they can use their appliances in the countries that they are visiting. A typical transformer might be rated at 1-kVA and 120/240 V. It has 5001 turns of wire on the 120-V side and 1000 turns of wire on the 240-V side. The magnetization curve for this transformer is shown in Figure P3-2, and can be found in file p32.mag at this book's Web site.

(a) Suppose that this transformer is connected to a 120-V, 60 Hz power source with no load connected to the 240-V side. Sketch the magnetization current that would flow in the transformer. (Use MATLAB to plot the current accurately, if it is available.) What is the rms amplitude of the magnetization current? What percentage of full-load current is the magnetization current?

(b) Now suppose that this transformer is connected to a 240-V, 50 Hz power source with no load connected to the 120-V side. Sketch the magnetization current that would flow in the transformer. (Use MATLAB to plot the current accurately, if it is available.) What is the rms amplitude of the magnetization current? What percentage of full-load current is the magnetization current?

(c) In which case is the magnetization current a higher percentage of full-load current? Why?

2. A 15-kVA 8000/230-V distribution transformer has an impedance referred to the primary of 80 + j300Ω.

The components of the excitation branch referred to the primary side are RC = 350 kW and X M= 70 kΩ .

(a) If the primary voltage is 7967 V and the load impedance is ZL = 3.2 + j1.5Ω, what is the secondary voltage of the transformer? What is the voltage regulation of the transformer?

(b) If the load is disconnected and a capacitor of -j3.5Ω is connected in its place, what is the secondary voltage of the transformer? What is its voltage regulation under these conditions?

Reference no: EM13967228

Questions Cloud

Health information is affected by social structures-beliefs : As an international student, you feel that warnings about obesity and diabetes, so common in America, aren’t very relevant to you. This idea is reinforced by your friends and family members with similar backgrounds. Which of the following theories re..
Describe the key psychological issues : Describe the key psychological, somatic, cognitive, neurological and behavioral issues counselors must be aware of when counseling a client with trauma
Organisational theory management and administration : Organisational Theory, Management and Administration. The chapter by Bush (2003) 'Formal Models' (from his book 'Educational Leadership and Management') provides us with a number of formal models for thinking about organisations. Critically analyse t..
Write description of the movie handling of the concept : For this assignment, you are asked to describe at least one major human development and/or family life cycle concept from either Forrest Gump or Flipped. Write a 3-4 page description of the movie's handling of the concept
What is the voltage regulation of the transformer : If the primary voltage is 7967 V and the load impedance is ZL = 3.2 + j1.5Ω, what is the secondary voltage of the transformer? What is the voltage regulation of the transformer?
What is the dual objective function : The primal problem calls for determining the set of outputs that will maximize profit, subject to input constraints. A. What is the dual objective function?
Calculate the value of fracture toughness : Briefly outline the differences between full film and hydrodynamic lubrication, giving a practical example of each type - Calculate the value of fracture toughness, KIC, for this particular aluminium.
Determine worklife challenges that either military personnel : Using the e-Activity, determine the importance of equal pay between men and women. Then, suggest two (2) valid reasons why their pay may be different for the same position. Justify your response.
What problems do you foresee with the implementation : What problems do you foresee with the implementation of this arrangement?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determien what could be the value of the resistor

if a 2 Watts resistor is dissipating less than or equal to its rated capacity with an applied voltage of 6 Volts, what could be the value of the resistor

  How access privileges affect members of derived class

1.Explain how access privileges affect members of the derived class and objects created from them. 2. For a multifile project that contains just one class, list and describe each of the files

  Write a vhdl model of a negative edge-triggered

Write a VHDL model of a negative edge-triggered T-type flip-flop. Write a VHDL model of a 10-state synchronous counter that asserts an output when the count reaches 10.

  Determine the net force on a positive charge q

two charges of equal magnitude 5x10-9 but opposite charge are separated by a distance of 10 meters. Determine the net force on a positive charge q =2x10-9, that is midway between the two charges.

  Find the magnitude of the phase current in the load

a) A delta-connected three-phase source has a phase voltage of 220 V. It feeds a delta-connected load consisting of three identical impedances of 10/42° O each. Find the magnitude of the phase current in the load, the line current

  What minimal bandwidth is necessary for the monitor

A chest radiograph of 43cm x 35cm is to be viewed on a v monitor wih a resolution of 3 lp/mm. what minimal bandwidth is necessary for the monitor if the image is displayed at 60Hz non-interlaced

  Determine stability by using the state space solution

Convert the following differential equation 5 (t) +4 (t) +3x.(t) + 2x(t) + 7u(t) - 5u.(t) + 2 (t) = 0 to state space form. Is this system marginally stable, asymptotically stable, or unstable when u(t) = 0 Determine stability by using the state sp..

  What is the probability that the chip is white

A chip is selected at random. If the color of the chip selected is white, it is eplaced and two more white chips are added to the urn. However, if the chip drwan is blue it is not replaced and no additional chips are put in the ..

  Find the mechanical torque loss and the load torque in test2

Given: A permanent magnet DC motor with kv = 0.7 v-s is tested under the following two conditions: Test 1: Apply 120 V; motor unloaded, Ia=2A and w=160 rad/s Test 2: Apply 120 V, increase load torque until Ia=6A and w=137.1 rad/s

  Submit a report describing and defending the design

A cable TV receiver has an input impedance of 200?. The cable TV distribution system uses RG-6 cable. This cable has a characteristic impedance of 75?. Design an impedance matching stage to maximize the power transfer from the wire to the receiver..

  Design a digital notch filter to reject frequency completely

Design a digital notch filter to reject frequency 5 kHz completely and to have a sharp recovery on either side of 5 kHz to a gain of unity. The highest frequency to be processed is 20 kHz.

  Design a 3-bit incrementer-decrementer

Design a 3-bit Incrementer/decrementer use btn_west as incrementer, i.e. when pressed, count increments by 1 use btn_east as decrementer, i.e. when pressed, count decrements by 1 use btn_south as reset, i.e. when pressed the count is resetted to 0.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd