What is the voltage at point directly west point

Assignment Help Electrical Engineering
Reference no: EM13247828

Consider a uniform electric field of 50 N/C directed toward the east. If the voltage measured relative to ground at a given point is 80 V, what is the voltage at a point 1.0 m directly west of that point?

Reference no: EM13247828

Questions Cloud

How much work you did during the holding period : You go to a gym and lift a 245-kg mass 2.13 m over the ground? You hold it for 10 seconds. How much work you did during the holding period
Determine transfer function for first order low pass filter : Determine the transfer function for a first order low pass filter with a cutoff frequency of 1000 radians/sec (note radians and not Hertz) and a pass band gain of 1 using the following types. (a) Butterworth type
Develop a regression model to fit the trend effects : Develop a regression model to fit the trend effects for the data. Use a linear model and then try a quadratic model and how well does either model fit the data?
Find the angle between the proton''s velocity and the field : A proton moving at 7.6 × 106 m/s through a magnetic ?eld of 8.8 T experiences a magnetic force of magnitude 2.5 × 10?12 N. What is the angle between the proton's velocity and the field
What is the voltage at point directly west point : Consider a uniform electric field of 50 N/C directed toward the east. If the voltage measured relative to ground at a given point is 80 V, what is the voltage at a point 1.0 m directly west of that point
Compute mean absolute deviation : Develop forecasts for the years 6 through 13 using a 5-year moving average and Weight the most recent year by 6, the previous year by 4, the year before that by 2, and the other years by 1.
Find line current and the power factor of the combined loads : Two three-phase loads are y-connected across a 300 Volt three phase line. One load draws 10kW at a p.f. of 0.9 leading, and the second load draws 8kW at a p.f. of 0.6 lagging. V(line-neutral)=300V/sqrt(3)=173.21V
How do government choices in regards to tariffs and quotas : Why doesn’t the U.S. simply restrict all goods coming in from China? Why can’t the U.S. just minimize the amount of imports coming in from all other countries?
Can the bond rate be predicted by the interest rate : Can the bond rate be predicted by the interest rate? Make the Bond rate the Dependent variable and Prime the independent variable.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Explain sr flip flop from d flip flops

SR flip flop from D Flip flops, Show how to build a rising edge triggered SR flip-flop using a rising edge triggered D flip-flop and combinational logic.

  Give circuit with minimum num of gates for binary multiplier

Design a circuit with minimum number of gates for a binary multiplier that multiplies two unsigned four-bit numbers, Using Inverters, AND, OR gates and Full Adders.

  Determine the bandwidth of the fm modulator output

A sinusoidal message signal has a frequency of 10 Hz. The signal is the input to an FM modulator with an index of 8. Determine the bandwidth of the modulator output if a power ratio, Pr = 0.8 is required.

  How to simulate the circuit using verilogger

The circuit will have as inputs a minimum of two inputs; the binary equivalent of two decimal numbers of not greater than (10,000)10. The circuit will also produce a minimum of two outputs, the quotient and the remainder.

  Determine minority carrier concentration at emitter-base

A silicon p-n-p transistor has impurity concentrations of 5*10^18, 2*10^17, and 10^16 cm^-3 in the emitter, base, and collector, respectively. The base width is 1.0 um and the device cross-section area is 0.2 mm^2.

  Which is setting subconductors a and c as a bundle

Each subconductor's radius is 10 cm. There are two configurations, the first one is setting subconductors A and B as a bundle, and C and D as another bundle; the second is setting subconductors A and C as a bundle, and B and D as another bundle.

  Write a matlab function for operation of a half-adder

Write a MATLAB function the performs the operation of a half-adder, call it half_add. The function should have two inputs, a and b, and return two outputs, X and c. Then, write another function, call it full_add, that invokes half_add to perform

  What will the secondary voltage be

If a transformer has a turns ratio of 1:5 and a primary voltage of 20 V AC, what will the secondary voltage be?

  Calculate the magnetizing branch impedances

A 10kVA, 200/400V 50Hz single-phase transformer gave the following test results. O/C test: 200V, 1.3A, 120W, on l.v. side. S/C test: 22V, 30A, 200W on h.v. side. (a) Calculate the magnetizing current and the component corresponding to core loss

  What will be potential difference between plates seperation

An Air capacitor consisting of two closely spaced parallel plates has a capacitance of 1000 pF. The charge on each plate is 1 micro C. What is the potential difference between the plates. If the charge is kept constant.

  Approximation of quarter circle using bezier curve

Approximation of quarter circle using Bezier curve, Determine the Bezier curve of order 3 that approximates a quarter circle centered at (0,0), (1,0), (0,1).

  What is the time-bandwidth product in the case

A radar transmits a monotone pulse of 5-s duration. Suppose the radar were redesigned so that the same pulse envelope is frequency modulated with linear FM over 100 MHz. (a) What is the possible new range resolution

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd