What is the viscosity of the liquid

Assignment Help Mechanical Engineering

Reference no: EM13712175

A liquid is draining from a cylindrical vessel through a tube in the bottom of the vessel. If the liquid has a specific gravity of .85 and drains out at a rate of 1 cm^3/s , what is the viscosity of the liquid? The entrance loss coefficient from the tank to the tube is.4 and the system has the following dimensions [Diameter of tank = 2 in., Height of liquid = 5 cm., diameter of tube = 2mm and length of tube = 10 cm] HINT: Sum: Kf = Kenter +Kpipe

Reference no: EM13712175

Questions Cloud

Weight of the hammer head during contact with the nail : A hammer head H having a weight of 0.31 lb is moving vertically downward at 40ft/s when it strides the head of a nail with negligible mass and drives it into a block of wood. find the impulse on the nail if it is assumed that the grip at A is loose, ..

Saturated properties out of the evaporator and condenser : A refrigerator uses R134a as the working fluid. It operates with a condensing temperature of 100Â°F (T3) and a low temperature of -10F. The compressor uses 500W of power. For an ideal cycle

Raise the temperature of the high temperature reservoir : If heat engines efficiency can be increased by increasing the highest temperature why do we not increase the temperature further for our power plants? What could be done still to raise the temperature of the high temperature reservoir? What could be ..

Find the stagnation temperature and pressure : Flowing in a convergent nozzle. At a particular location within the nozzle the pressure is 280kPa, the stream temperature is 345K, and the velocity is 150 m/s. If the cross-section area at this location is 9.29 x 10^3m^2,

What is the viscosity of the liquid : A liquid is draining from a cylindrical vessel through a tube in the bottom of the vessel. If the liquid has a specific gravity of .85 and drains out at a rate of 1 cm^3/s , what is the viscosity of the liquid?

What would be the power output of the prototype : It is required that a pump be designed for use in a chemical plant such that it delivers 0.8 m^3/s of benzene with a pressure increase of 320 kPa. What is the expected flow and pressure increase produced by a model one-sixth the size of the prototype..

Determine the mass rate of flow through the nozzle : Air flows isentropic ally through a convergent-divergent passage with inlet area 5.2 cm^2, minimum area 3.2cm^2 and exit area 3.87 cm^2. At the inlet the eir velocity is 100m/s, is 680 kPa, and temperature 345 K.

Single-stage ideal regenerative steam cycle : A single-stage ideal regenerative steam cycle has a boiler pressure and temperature of 5000 kPa and 500 C, and a condensing pressure of 10 kPa. The extraction pressure is 500 kPa.

What is the apparent gravity at the counterweight : Space stations don't need to be round to have artificial gravity. The tethered spacecraft in the diagram to the right represents an alternative design. Put the astronauts in a passenger capsule. (Put the "spam in a can" as they say.) Tether it to a h..

User Account

All Pages