What is the velocity and rate of flow of the metal

Assignment Help Mechanical Engineering

Reference no: EM13212109

Pure aluminum is being poured into a sand mold. The metal level in the pouring basin is 25.4cm above the metal level in the mold, and the runner is circular with a 1.016cm diameter. What is the velocity and rate of flow of the metal into the mold? Is the flow turbulent or laminar? (Pure aluminum density ρ = 2.7 g/cm3).

Reference no: EM13212109

Questions Cloud

Why to not calculate final pw calculation : Lane college in Jackson, Tennessee is considering the conversion of an abandoned church pew manufacturing plant adjacent to the school's campus into a 34,000 square foot building to house the campus bookstore, a conference center, a small business..

What input voltage will be computed by the adc : A successive approximation ADC has 4 bits and a reference voltage of 10 V. If the input voltage is 2.8 V, describe each step the ADC undergoes to determine the value of the 4 bits. What input voltage will be computed by the ADC?

Compute the pressure when the temperature is 303 k : volume of 2.25 L at 278 K and 1.01 atm. Calculate the pressure when the volume is 1.95 L and the temperature is 303 K.

Determine the tension in the cable : The bent rod ABDE is supported by ball-and- socket joint at A and E and by the cable DF. If a 600-N load is applied at C as shown , determine the tension in the cable.

What is the velocity and rate of flow of the metal : What is the velocity and rate of flow of the metal into the mold? Is the flow turbulent or laminar? (Pure aluminum density ρ = 2.7 g/cm3).

Would you recommend more garbage disposal services : suppose you know that CLS's MRT of wine of garbage disposal services is 2:1(to obtain more bags of garbage disposal services requires a reduction of one bottle of wine (keep inputs constant), and Brewster's MRS of wine for garbage disposal is 3:1.

Find the orthogonal rake angle of the cutting tool : the friction force acting at the chip-tool interface the main (tengential ) cutting force is 1500N . Find the orthogonal rake angle of the cutting tool?

What is the required reserve ratio : How much excess reserves does the bank hold and how much more can this bank lend - What is the required reserve ratio?

State what is the airborne radioactivity concentration : What is the airborne radioactivity concentration? Using 10 CFR 20, if the particles are composed of cobalt oxide, how many DAC does this represent?

User Account

All Pages