What is the terminal voltage

Assignment Help Electrical Engineering
Reference no: EM131208662

A self-excited DC shunt generator is delivering 20 A to a 100-V line when it is driven at 200 rad/s. The magnetization characteristic is shown in Figure P17.20. It is known that Ra = 1.0 Ω and Rf = 100 Ω. When the generator is disconnected from the line, the drive motor speeds up to 220 rad/s. What is the terminal voltage?

423_879d6938-2db9-45c2-b78c-8138b781221f.png

Reference no: EM131208662

Questions Cloud

Calculate the front and back focal lengths of the lens : Find the front and the second focal lengths of the lens.- Calculate the front and back focal lengths of the lens.- Draw a diagram of the system.
What will be the effect upon counter emf : What effect will this change have upon the operation of the motor, and what will be its speed when stable operating conditions have been regained?
Owner of a store selling nuts plans : The owner of a store selling nuts plans to mix a more expensive nut-mix that costs 7$ per pound with a less expensive mix that costs 3$ per pound to create a 50-pound blend that will sell for 5.40$ per pound. How many pounds of each type of tea ar..
How does it impact the u.s. legal system : All references and citations used must be in APA format. The second one is What is the origin and purpose of judicial review? How does it impact the U.S. legal system? What are some ways that you see judicial review affecting health care in the U...
What is the terminal voltage : When the generator is disconnected from the line, the drive motor speeds up to 220 rad/s. What is the terminal voltage?
Find the dimensions of the garden : The perimeter of a rectangular garden is 126 meters. The length is 6 meters longer than twice the width. Find the dimensions of the garden.
Describe the intellectual interests and ideas of its faculty : What was Black Mountain College? Briefly describe the intellectual interests and ideas of its faculty and students. Who was John Cage? How did he influence visual art in the 1950s? Briefly explain how Alan Kaprow believed his work followed from Jac..
Calculate the percent losses in the field and in the field : A 50-hp, 230-volt shunt motor has a field resistance of 17.7 Ω and operates at full load when the line current is 181 A at 1,350 rev/min.
Classify and explain the r&d investment strategy : Consider a two-stage game where firms invest in cost-reducing R&D in the first stage and set prices in the second stage. Classify and explain the R&D investment strategy in case of s = 0 according to the general taxonomy of business strategies

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find what is the dc voltage between the conductor ends

A copper conductor has a dia of 0.06 in and it is 1200ft long. Assume that the current total (dc) carried is 50A. Find the total resistance of the conductor. What current density exists in it What is the dc voltage between the conductor ends

  Design a sequential circuit that receives a duty cycle

Design a sequential circuit that receives a 50% duty cycle clock offrequency f and outputs a clock signal of frequency f/7. (Note: theoutput does not have a 50% duty cycle.) Provide a complete schematic.

  Determine the voltages vx and vy at two metallic terminal

The terminal on the right is the positive reference for a voltage called v y (the other terminal being the negative reference). If it takes 1 mJ of energy to push a single electron into the left terminal, determine the voltages vx and vy.

  Perform a logical shift right by 4 positions

Perform a logical shift right by 4 positions on each of the following unsigned numbers to form a 12-bit result: 100101010000 and 000101001000. In each case, does the result exactly represent division by 16?

  Estimate the primary current with secondary open

The laminated silicon steel core of a transformer has a mean length of 0.06 m and a cross section of 0.005 meter square. there are 150 turns on primary winding and 450 turns on the secondary. the input is 200 V rms at 50 Hz.

  At what distance from the ring''s center is e maximum

Could you please double check my method and determine what I am missing to solve z for the maximum E?

  What is the total number of electrons transported

What is the total number of electrons transported from the positive electrode to the negative electrode by the charge escalator from the time the battery is first used until it is completely dead?

  What overshoot for a step input to be expected

A control system for positioning the head of a floppy disk drive has the closed-loop transfer function T(s)=11.1(s+18) / (s+20)(s^2+4s+10). Plot the poles and zeros of this system and discuss the dominance of the complex poles.

  Simplify the equations using a k-map and draw final circuit

Write the full equations to light the bottom segment of a 7-segment display. INLCUDE the hexadecimal digits too ( b, c, d, and E ). Then simplify the equations using a k-map and draw the final circuit.

  Find induced emf across the open-circuited ends of coil

Determine the force exerted on q2 by q1 if q1 = 3 x 10-4 C and q2 = -10-4 C and are located at point A(1, 2, 3) and point B(2, 0, 5). respectively.

  What is role of miller in high frequency amplifier design

1. What is Miller capacitance What is its role in High frequency amplifier design Label all the involved variables in the Figure below and derive an expression for the Miller effect capacitances (input and output).

  Use j-k flip flops for the moore machine of boolean equation

With the following Boolean equations sketch a Moore Machine J0= Q'0 and y J1= Q2 and y or Q0 and y' J2 = Q1 and Q0 and y' K0 = Q0 and y' K1 =Q'0 and y' or Q'2 and Q0 K2= Q2 and Q'0 Use J-k flip flops for the Moore Machine J and K represent the fli..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd