User Account

All Pages

What is the temperature of the refrigerant

Assignment Help Mechanical Engineering
Reference no: EM13712354

Consider a sealed can that is filled with refrigerant-134a at 20°C. Now a leak develops, and the pressure in the can drops to the local atmospheric pressure of 80 kPa. What is the temperature of the refrigerant in the can when the pressure drop is complete?

Reference no: EM13712354

Questions Cloud

Mixture of air and water at a temperature : A mixture of air and water at a temperature of 30ºC and a pressure of 750 mmHg has a relative humidity of 75%. The wet gas is compressed to 40 psia and cooled to 20ºC. How many cubic meters of original gas were compressed if 0.75 lb of condensate (wa..
Don kim, a critical analysis component seems particularly : Don Kim, a critical analysis component seems particularly relevant in today's society, "Where the line should be drawn between an individual's responsibility to take care of himself/herself and society's responsibility to protect that individu..
Diameter pipeline terminates in a nozzle of outlet diameter : A 0.3-m diameter pipeline terminates in a nozzle of outlet diameter = 0.15 m. When water flows through this pipe at a rate of 0.25 m3 /s, the force required to hold the pipe (N) is most nearly.
Mini-assignment, summarize the original article : Read one of the articles and follow the trail of references and resources. For your mini-assignment, summarize the original article, record where you went in your research, and what you learned. You should follow and report on at least four l..
What is the temperature of the refrigerant : Consider a sealed can that is filled with refrigerant-134a at 20°C. Now a leak develops, and the pressure in the can drops to the local atmospheric pressure of 80 kPa. What is the temperature of the refrigerant in the can when the pressure drop is co..
Calculate of power for adiabatic-two isothermal processes : Calculate of power [delivered heat/time] for adiabatic and two isothermal processes? Calculate of power [delivered heat/time] for this cycle which consists of two isobaric (constant pressure) and two isochoric (constant volume) processes?
K and l are mobile across sectors. : The next three questions pertain to the two-good (M,F)-two-factor (K-L) Harberger model.Unless noted otherwise, assume that each factor of production is always fully employed, allmarkets are competitive, and K and L are mobile across sectors.
What are the enthalpy and entropy changes of the steam : The state of 1 lbm of steam is changed from saturated vapor at 20 psia to superheated vapor at 50 psia and 1000 F. What are the enthalpy and entropy changes of the steam? What would the enthalpy and entropy changes be if steam were an ideal gas?
What is the exit temperature of cold water : An adiabatic heat exchanger is used to heat cold water at 8°C entering at a rate of 3 kg/s by hot air at 150°C entering also at rate of 3 kg/s. If the exit temperature of hot air is 30°C, what is the exit temperature of cold water? Use constant speci..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Fig book design of machinerywith using the following data

fig book design of machinerywith using the following data for the above diagram find torque at o2 and forces at o2 a

  The 20degc surroundings experience an entropy increase of

consider an r-134a compressor on a refrigeration system. if the refrigerant enters as saturated vapor at 200 kpa 0.03

  Apply risk management techniques all steps learned in the

apply risk management techniques all steps learned in the class to analyze the failure and what could have been done to

  1 steam is contained in a closed rigid container with a

1. steam is contained in a closed rigid container with a volume of 1 m3. initially the pressure and temperature of the

  What is the overall efficiency of the wind turbine

It is desired to design a wind turbine that will output 2MW of peak electrical power at a location where the average wind speed is 10 m/s and the average ambient conditions are 85 kPa and 5 ?C. What should the rotor blade length be if the aerodynamic..

  Maximize the generated sound power

If your audio stereo amplifier has an output impedance of 8?, what resistance should your speaker coils have to maximize the generated sound power

  Determine the change in internal energy the change in

consider 5 kg of air initially at 101.3 kpa and 38 c. heat is transferred to the air until the temperature reaches 260

  Find out the open circuit voltage v of the cell assume a

consider a 6 cm2 dye sensitised solar cell with reverse saturation current jr10-10acm2. when the solar irradiance is

  Determine the amount of heat that must be removed

A vessel with a volume of 0.0011 m3 is filled with dry saturated steam at a pressure of 95 kPa. It is then sealed and cooled to 250C. Determine the amount of heat that must be removed.

  Prove that the process is irreversible in modeling this

an egg initially at rest is dropped onto a concrete surface it breaks. prove that the process is irreversible. in

  An ideal reheat rankine cycle with water as the working

an ideal reheat rankine cycle with water as the working fluid operates the inlet of the high-pressure turbine at 8000

  Steam at 1 bar enters an adiabatic heat exchanger with a

steam at 1 bar enters an adiabatic heat exchanger with a quality of 0.901 and exits as a saturated liquid. the steam is

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd