What is the temperature of the billet

Assignment Help Mechanical Engineering
Reference no: EM131121759

A long rod passes through the opening in an oven having an air temperature of 400°C and is pressed firmly onto the surface of a billet (Fig. P16.46). Thermocouples imbedded in the rod at locations 25 and 120 mm from the billet register temperatures
of 325 and 375°C, respectively. What is the temperature of the billet?

548_d94d0ee0-3e88-41d0-9310-93bcc1e39912.png

Reference no: EM131121759

Questions Cloud

Determine the angular velocity of bar ab : Knowing that at the instant shown bar AB is rotating counterclockwise and that the magnitude of the velocity of the midpoint of bar BC is 7.8 ft/s
Pilots from flying corporate aircraft after they reached : Exxon maintained a corporate policy that prohibited its pilots from flying corporate aircraft after they reached the age of 60 and forced such pilots to involuntarily retire at age 60. This rule mirrored a rule used by the FAA that applied to pilots ..
An asymmetric traveling salesman problem : Show that an asymmetric traveling salesman problem with nodes 1,...,N and arc costs aij can be converted to a symmetric traveling salesman problem involving
Consider the symmetric traveling salesman problem : Consider the symmetric traveling salesman problem with the graph shown in Fig. 10.16. (a) Find a suboptimal solution using the nearest neighbor heuristic starting from node 1.
What is the temperature of the billet : Thermocouples imbedded in the rod at locations 25 and 120 mm from the billet register temperaturesof 325 and 375°C, respectively. What is the temperature of the billet?
What percent of the time will the pumps be idle : A new full-service, attendant-staffed fuel and car service station on Interstate 95 will service onlynorthbound cars. The manager estimates that customers will arrive every 4 minutes and willrequire 6 minutes to be served at the pump. How many pumps ..
Lounge earn most of their income from tips : Waiters at Finegold's Restaurant and Lounge earn most of their income from tips. Each waiter is required to "tip-out" a portion of tips to the table bussers and hostesses.
How could you involve the oshrc in the criminal case : Which of the citations could be referred to the U.S. DOJ for criminal proceedings? What conditions would have to be met before the citations could be referred for criminal proceedings?
Typical patterns of product and process innovation : How are typical patterns of product and process innovation? – and - Why is this important to managers? What is Normal innovation? Why do we care? What is Revolutionary innovation? Why do we care? What is a disruptive technology? – and - What is the a..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  For studying the effects of mechanical loading on the bone

For studying the effects of mechanical loading on the bone, a diaphysis is isolated as shown in the Figure. Pins extended from the metal caps over the bone ends. Assume a load is applied between the ends of the pins as shown.

  Assume that the flow is fully developed steady and

for a two dimensional channel flow i.e. the flow between two plates of infinite length and span assume that the flow is

  The vessel will rupture if the pressure reaches 5 mpa what

15 kilograms of water are confined in a rigid vessel with a volume of 0.5 m3 with an intitial temperature of 50

  Room is heated by a base-board resistance heater

Room is heated by a base-board resistance heater, which is designed to heat the air in this room from 8oC to 27 oC within 20 min. Approximating the room as a thermo-insulated cuboid 15m ? 10m ? 5m and assuming the specific heats to be constant at a r..

  Determine the temperature of the insulated surface of the

consider a large plane wall of thickness l 0. 5 m. the wall surface at x 0 is insulated while the surface at x l is

  A projectile is fired at an angle of 62deg from the

a projectile is fired at an angle of 62deg from the horizontal with a velocity of 704 ftsec. if it lands 4.75 seconds

  Determine sufficient inlet pressure to avoid cavitation

Set up an equation that can be used to determine if pump L-101 will have sufficient inlet pressure to avoid cavitation

  What vertical distance do the two stones miss

Two girls standing 20 m apart are both throwing balls towards a tree to knock down a shoe hanging 7 m up in a tree that is directly between them. Girl A is 7 m from the tree while Girl B is 13 m from the tree.

  A cycle consisting of one constant pressure

A cycle consisting of one constant pressure, one constant volume and two isentropic processes

  A commercially available sump pump is capable of

1. a pump is being used to transfer water from an open tank p1 0 to one having air at 75 psig p2above the water as

  A 7-m- diameter spherical hot air ballon is neither rising

a 7-m- diameter spherical hot air ballon is neither rising nor falling at some height. the density of atmoshpheric air

  Determine the exit temperature of the air and the rate of

hot air at atmospheric pressure and 80oc enters an 8-m long un-insulated square duct of crosssection 0.2mx0.2m and

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd