Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
What is the principle behind CRT(CATHODE RAY OSCILLOSCOPE), and How this method is simplified in LCD and LED. Is the same CRT principle used in LCD and LED Televisions. If no what is the principle used in LCD and LED Tvs.
A 200hz(mode 1), 50% duty cycle square wave is to be generated at Timer0 interrupt. a) write a main program that would set Timer0 and the interrupt,and then force the first interrupt.
A 3-phase 230 V, 9 kVA, 0.9 PF (lagging) load is supplied by 10 kVA, 1330/230 V, 60 Hz three-phase transformer connected in Y-?. The equivalent impedance of transformer referred to the low-voltage side is 0.12 + j0.25.
What is the thermal noise level of a channel with bandwidth 10kHz carrying 1000. Watts of power at 50o C?
If there is two AC currents in a circuit and both have different angular velocity, is there a way to analyze the circuit by finding an equivalent angular velocity between the two currents and superposition can't be used
Design an ac-dc voltage converter based on half-wave rectification and filtering. The requirements are: 1. Choose the values of the load resistor R and the capacitor C so that the converter will have a ripple factor of 10%
Basics problems of Induction motor, The frequency of the induced rotor currents in the rotor of a 60 Hz induction, machine is 2 Hz. Furthermore, the fields in the air gap turn at -40 rpm with respect to the rotor.
Three-phase inverter has Y-connected load of 10 ohm and 23mH inductance. The inverter frequency is 60Hz and the dc input voltage is 200v. Calculate line voltage rms? , Phase voltage, rms?
(d) Use the colon operator to create a matrix D by extracting the first through third columns of matrix A. (e) Create a matrix F by extracting the values in columns 2, 3, and 4 and combining them into a single column matrix. (f) Create a matrix G tha..
A 277/480V three phase wye system has the following load: M1- Induction Motor, 50hp, n=0.91, PF= 0.89 at full load. M2- Induction motor, 25hp, n=0.9, PF= 0.9 at full load. R- Heater Load, PF=1 M- A synchronous motor to drive a second 25hp load.
Half-Wave Rectifier, For the half-wave rectifier, the source is a sinusoid of 120 Vrms at a frequency of 60 Hz. The load resistor is 5 ohms. Determine
Design a circuit that will add either 1 or 2 to a 4-bit binary number N. Let the inputs N3, N2, N1, N0 represent N. The input K is a control signal. The circuit should have outputs M3, M2, M1, M0, which represent the 4-bit binary number M.
Transfer function in s t = [0-2*Ts : Ts : Tmax] ; Find the actual solution using the inverse laplace transform syms ycont ycont = ilaplace(Gs,t) Sampling times of 0.01, and simulation runs for 10 seconds
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd