What is the output torque of this motor at rated condition

Assignment Help Electrical Engineering
Reference no: EM131203108

A 460-V 200-kVA 0.85-PF-leading 400-Hz four-pole Y-connected synchronous motor has negligible armature resistance and a synchronous reactance of 0.90 per unit. Ignore all losses.

(a) What is the speed of rotation of this motor?

(b) What is the output torque of this motor at the rated conditions?

(c) What is the internal generated voltage of this motor at the rated conditions?

(d) With the field current remaining at the value present in the motor in part (c), what is the maximum possible output power from the machine?

Reference no: EM131203108

Questions Cloud

What is the resistance of a copper bus bar : What is the resistance of a copper bus-bar with the dimensions shown (T = 20°C) in Figure?- Repeat (a) for aluminum and compare the results.
What is the torque angle of the motor : How much real, reactive, and apparent power is being supplied to the plant now? What is the current IL in the transmission line?
Determine the increase in resistance of a copper conductor : Determine the increase in resistance of a copper conductor if the area is reduced by a factor of 4 and the length is doubled.
What is the new resistance level of a copper wire : What is the new resistance level of a copper wire if the length is changed from 200 ft to 100 yd, the area is changed from 40,000 CM to 0.04 in.2, and the original resistance was 800 mΩ?
What is the output torque of this motor at rated condition : A 460-V 200-kVA 0.85-PF-leading 400-Hz four-pole Y-connected synchronous motor has negligible armature resistance and a synchronous reactance of 0.90 per unit.
Identify health care issue that interest you and explain why : List the strategies you would use to lead the team to success and identify potential obstacles that may be faced, along with plans to deal with them.
Comprise of proposed selected participants : Choosing data collection tools and methods - Comprise of proposed selected participants, research design, and data analysis. I believe could help me to be able to collect the require data with the aid of self-completion surveys questionnaires from..
What does this say about the auditor : BUACC5935: Auditing & Assurance Services Assignment. Trust takes years to build, seconds to break, and forever to fix. What does this say about the auditor/management relationship
What gage wire should be used : For the system of Figure, the resistance of each line cannot exceed 0.006 Ω, and the maximum current drawn by the load is 110 A. -  What gage wire should be used?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  How square wave output replacing the mechanical switch

Give an example of an RC circuit whose transient behavior cannot be modeled by having a function generator with square wave output replacing the mechanical switch.

  Determine the current in each branch and the applied voltage

A certain parallel circuit coornsists of onrely 1/2 W resistors each having the same resistance. The total resistance is 1 k ohm and the total current is 50mA. If each resistor is operating at one-half its maximum power level

  Find resistance of copper conductor of equal cross section

In a toaster the heating unit is a Nichrome wire whose resistance is 660 micro-ohm-CM/ft and resistance is 20 ohms.Determine the resistance of copper conductor of equalcross-section, but 10 times as long as the Nichrome wire.

  Calculate the value of q for the filter

Design a band-pass filter with a low cutoff frequency of 200 Hz, a high cutoff frequency of 1 kHz, and a pass-band gain of 4. Calculate the value of Q for the filter. Also, draw the approximate frequency response of this filter.

  Which mains frequency gives a more desirable choice of c1

Which mains frequency gives a more desirable choice of C1

  Find the inductance l and capacitance c of the circuit

The bandwidth of a series resonant circuit is 400 Hz. (a) If the resonant frequency is 4000 Hz, find Q. (b) If R = 10?, what is the value of XL at resonance (c) Find the inductance L and capacitance C of the circuit.

  What is the maximum allowable ampacity

What is the maximum allowable ampacity of a #2 AWG THHN copper conductor connected to a breaker having 60 C termimal ratings

  How could the rising-tone acoustical illusion

How could the rising-tone acoustical illusion be modified to obtain a tone that goes up and down in pitch at the same time.

  What type of filter should be used to reduce the noise

In an electrocardiograph, the heart signals contain components with frequencies ranging from dc to 100Hz.During exercise on a treadmill, the signal obtained from the electrodes also contains noise generated by muscle contractions. Most of the nois..

  Implement a 5x5 signed multiplier and determine the number

implement a 5x5 signed multiplier and determine the number of full and half adders needed for the multiplier. draw a

  Find what is the cost of heat without the installation

If the cost of heat rises by $200 per year (uniform gradient) after the next year and the owner plans to keep the present building for 15 more years, if the interest is 10% per year, what is the cost of heat without the installation

  Determine the four arithmetic operations performed

Input Xi and Yi of each Full Adder circuit in an arithmetic circuit has the digital logic specified by the following Boolean functions: Xi =Ai Yi = B*iS + BiCin* Where S is a selection variable, and Cin is the input carry, and Ai and Bi are the inp..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd