What is the nominal full load current per phase

Assignment Help Electrical Engineering
Reference no: EM13227472

A 150MW alternator generates an open-circut line-t0-line voltage of 12kV at nomial DC excitiation. When the terminals are placed in short-circuit the resulting current per phase is 8000A.

a) Calculate the approximate value of the synchronous reactance per phase.

b) draw the equivalent circuit of the alternator per phase under the DC field excitation conditions given above.

c) What is the nominal full load current per phase ?

Reference no: EM13227472

Questions Cloud

Compute the mass of silver deposited by a battery : Suppose the current flowing from a battery is used to electroplate an object with silver. Calculate the mass (in grams) of silver the would be deposited by a battery that delivers 1.25 A/hr of charge.
Generate a clock signal with 5 khz frequency : Write an asm HCS12 program to flash LEDs on a dragon+ board three times when SW5 is pressed with a 5 kHz frequency, and 50% duty cycle clock signal. Generate a clock signal with 5 kHz frequency, and 50% duty cycle.
What are the most important criteria : In selecting outside advisors, a board, consultants, and the like, what are the most important criteria?
Has globalization of supply chains encouraged or discouraged : Has globalization of supply chains encouraged or discouraged Vendor Managed Inventories?
What is the nominal full load current per phase : A 150MW alternator generates an open-circut line-t0-line voltage of 12kV at nomial DC excitiation. When the terminals are placed in short-circuit the resulting current per phase is 8000A. a) Calculate the approximate value of the synchronous reacta..
How many moles of no are obtained n2 is completely reacted : Consider the reaction below. N2(g) + O2(g) ? 2 NO(g) Part A: How many moles of NO are obtained when 0.032 mol of N2 is completely reacted?
Why is information technology such an important element : Why is information technology such an important element when entering into a VMI agreement? Explain using examples from Eka Chemicals and Interfast.
Advising a canadian company about importing a product : Description of the route the import will take, from source region to market in Winnipeg, noting mode(s), likely Incoterms and ports of exit and entry
What elements outside have an interest in the negotiations : What elements outside have an interest in the negotiations, or can affect our the negotiations in a positive or negative ways for either of us. Who can affect the rules?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Define design bandpass filter of ''sallen and key'' topology

Design a bandpass filter of 'Sallen and Key' topology and having the following characteristics fo = 3.3 kHz, Q = 2.2

  Determine the nominal value and the maximum tolerance

a resistor is required for an application that requires its value to be no less than 7.1k ohms and not more than 7.9k ohms. determine the nominal value and the maximum tolerance of the resistor you could use. explain.

  Create the walsh code matrix for a w

Create the Walsh code matrix for a W16. (c) For IS-95, on the forward link, list the Walsh code assigned to the various logical channels (hint: there are 64 Walsh codes)

  Calculate the unit-pulse response

Compute the unit-pulse response h[n] for the discrete-time system y[n+2]2y[n+1]+y[n]=x[n] (for n = 0, 1, 2, 3).

  Calculate the unknown constant in homogeneous part

b) find nonhomogeneous solution with method of undetermined coefficient with constants evaluated c) combine homogeneous soluton with nonhomogeneous solution to form the general solution calculate the unknown constant in homogeneous part

  At what temperature are the two carrier densities equal

At what temperature are the two carrier densities equal?

  Determine what should the address size be

If you have 16 kibibytes of memory plus a few (less than 10) memory mapped devices (assume that each device uses 16 bytes of address space), what should the address size be

  Find the charge on the capacitor

the circuit has been connected for several seconds, find current in (a). in the 4.00 volts battery, (b). in the 3.00 ohm resistor, (c). in the 8.00 volts battery, (d). in the 3.00 volts battery and (e). find the charge on the capacitor?

  How many fm radio stations could be accommodated in channel

An ordinary broadcast television channel has a bandwidth of 6 MHz. How many FM radio stations (with a bandwidth of 200 kHz each) could be accommodated in one television channel using FDM

  Draw a band diagram

Calculate the Fermi level position relative to conduction band (Ec-Ef) and relative to valence band (Ef-Ev).

  Calculate the mass of the cooling water in a minute

an electrical transformer dissipates heat equivalent of 3000 kW/h. the inlet and outlet temperatures of the cooling water are 55C and 15C respectively. calculate the mass of the cooling water in a minute.

  Design a phase shift circuit at a frquency

1- Draw a circuit whose output goes to + V sat . When the input signal is below -4V. the output should be -V sat, when the input is above - 4V  2- Design a - 90 phase shift circuit at 1590 Hz , Then for your design calculate 0 at 15 Hz, & 15 KHz

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd