What is the moment of inertia of the door about the hinges

Reference no: EM13306964

A sheet of plywood 1.39 cm thick is used to make a cabinet door 55.5 cm wide by 69.5 cm tall, with hinges mounted on the vertical edge. A small 181-g handle is mounted 45 cm from the lower hinge at the same height as that hinge. If the density of the plywood is 550 kg/m3, what is the moment of inertia of the door about the hinges? Neglect the contribution of hinge components to the moment of inertia.

Reference no: EM13306964

Questions Cloud

Determine the required slab thickness of subgrade reaction : the reliability is to be 95%, the overall standard deviation is 0.4, the drainage coefficient is 0.9, delta PSI is 1.7 ( with TSI of 2.5), and the load transfer coefficient is 3.2. the modulus of subgrade reaction is 200 lb/in^3.

Determine the percent overload if load estimate is correct : A customer estimates that he is getting 30 cubic yards (loose) of gypsum in his scraper. Determine the percent overload if the load estimate is correct. The maximum load capacity of the scraper is 84,000 pounds.

Determine how much time will the clocks differ in time : Suppose two highly precise, identical clocks are synchornized and one clock is placed at the North Pole and one clock is placed at the equator. After 100 years, how much time will the clocks differ in time

How many trips would one rubber-tired herrywampus have : How many trips would one rubber-tired Herrywampus have to make to backfill a space with a geometrical volume of 5400 cubic yard. The maximum capacity of the machine is 30 cubic yard (heaped), or 40 tons.

What is the moment of inertia of the door about the hinges : A sheet of plywood 1.39 cm thick is used to make a cabinet door 55.5 cm wide by 69.5 cm tall, what is the moment of inertia of the door about the hinges

How many after-tax dollars : How many after-tax dollars did she receive per year from Policy A?

Determine the unit strain developed in the concrete : a concrete test cylinder is loaded with p= 100k (445 kn) and resulting shortening of 0.036" (0.0914 mm). determine the unit strain developed in the concrete.

Obtain the heat added to the gas : One mole of neon, a monatomic gas, starts out at conditions of standard temperature and pressure. find the heat added to the gas

What are the major factors that both constrain and influence : What are the major factors that both constrain and influence a legislative body's budgetary deliberations? How do agencies attempt to influence a state legislature or Congress on behalf of their programs?

User Account

All Pages