What is the force exerted on the planet by the star

Reference no: EM13550562

A planet of mass 7*10^24 is at location <-4*10^11, 6*10^11,0> m A star of mass 8*10^30 is at location <4*10^11,-6*10^11,0>m. What is the force exerted on the planet by the star ?

Reference no: EM13550562

Questions Cloud

Find the relation between the heat transfer : A cylinder 5 m high with a 2m diameter is filled with water at 20 degrees C at 101 kPa is placed on the ground (circle side down). It is then drained form the bottom. What is the entropy generation in this process? Note: this is a transient process, ..

What is the speed at the top of the cannonballs trajectory : A cannon fires up at an angle 60 degrees above horizontal with a muzzle velocity of 60 m/s. What is the speed at the top of the cannonballs trajectory?

Find the focal length of the mirror and find magnification : A clown is using a concave makeup mirror to get ready for a show and is 26 cm in front of the mirror. The image is 70 cm behind the mirror. (a) Find the focal length of the mirror. (b) Find the magnification.

The speed of a sinusoidal wave on a string depends on : The speed of a sinusoidal wave on a string depends on:

What is the force exerted on the planet by the star : A planet of mass 7*10^24 is at location m A star of mass 8*10^30 is at location m. What is the force exerted on the planet by the star ?

Determine the distance traveled before takeoff : An airplane accelerates down a runway at 3.20 m/s2 for 32.8 s until is finally lifts off the ground. Determine the distance traveled before takeoff.

An ac generator supplies an rms voltage : An ac generator supplies an rms voltage of 5.00 v to an RL circuit. At a frequency of 21.0kHz the rms current in the circuit is 45.0 mA; at a frequency of 26.0 kHz the rms current is 40.0 mA. What is the values of L in this circuit? What is the value..

The semicircle is rotated through half a revolution : A loop of wire has the shape shown in the drawing. The top part of the wire is bent into a semicircle of radius r = 0.23 m. The normal to the plane of the loop is parallel to a constant magnetic field ( = 0°) of magnitude 0.73 T. What is the change ?..

Find the angular speed of the pulley at the same moment : In the figure below, the hanging object has a mass of m1 = 0.480 kg; the sliding block has a mass of m2 = 0.770 kg; and the pulley is a hollow cylinder with a mass of M = 0.350 kg, an inner radius of R1 = 0.020 0 m, and an outer radius of R2 = 0.0..

User Account

All Pages