What is the final volume of the gas in cubic metres

Assignment Help Physics
Reference no: EM13539266

One mole of an ideal monatomic gas is expanded adiabatically and quasi-statically from a pressure of 1,172 kPa and a temperature of 273 K to a pressure of 279 kPa. What is the final volume of the gas in cubic metres?

Reference no: EM13539266

Questions Cloud

Between the refracted blue and red rays in the crown glass : A ray of sunlight is passing from diamond into crown glass; the angle of incidence is 35.8°. The indices of refraction for the blue and red components of the ray are: blue (ndiamond = 2.448, ncrown glass = 1.528), and red (ndiamond = 2.407, ncrown gl..
What was the force on the sled during the impact : A child's sled has rails that slide with little friction across the snow. Logan has an old wooden sled with heavy iron rails that has a mass of 11 m/s quite a bit for a 27 kg child! Logan runs at 4.0 m/s and leaps onto the stationary sled and hold..
Find the electric dipole moment of the object : A small, rigid object carries positive and negative 3.00-nC charges. It is oriented so that the positive charge has coordinates (?1.20 mm, 1.00 mm) and the negative charge is at the point (1.50 mm, ?1.30 mm).
The thermometer is placed in an ice bath : A mercury thermometer is free of all markings. The thermometer is placed in an ice bath. When the thermometer is in equilibrium with the ice bath the position of the mercury column is marked on the glass. The thermometer is then placed in boiling ..
What is the final volume of the gas in cubic metres : One mole of an ideal monatomic gas is expanded adiabatically and quasi-statically from a pressure of 1,172 kPa and a temperature of 273 K to a pressure of 279 kPa. What is the final volume of the gas in cubic metres?
Heating is due to the heat released from steam condensing : Water has a latent heat of vaporization of 2257 kJ/kg. Steam is used to heat a copper tube of 0.358 kg from 21 degrees C to 100 degrees C. All the heating is due to the heat released from the steam condensing. What is the minimum mass of steam that c..
What is the work in joules done by the gas : An ideal gas's initial conditions are 1 mol, a pressure of 271.7 kPa, an internal energy of 624 J and a volume of 0.8 L. The gas is allowed to expand quasi-statically at constant pressure to a volume of 6.9 L. It is then cooled at constant volume unt..
A refrigerator has a coefficient of performance : A refrigerator has a coefficient of performance of 7.9. How much heat in joules is exhausted to the hot reservoir when 209 J are removed from the cold reservoir?
Supplied if the volume is kept constant during heating : One mole of an ideal diatomic gas is heated from a temperature of 19 degrees C to a temperature of 149 degrees C. How much heat in joules must be supplied if the volume is kept constant during heating?

Reviews

Write a Review

Physics Questions & Answers

  Explain how you may go about defending it

A plate carries a charge of -3.7 C, while a rod carries a charge of +1.9 C. How many electrons should be transferred from the plate to the rod, so that both objects have the same charge.

  Determine the current induced in the rod

A 15-cm-long metal rod pulled along two frictionless, conducting rails at a constant speed of 3.5 m/s. What is the current induced in the rod

  Find the coefficient of kineticfriction between puck and ice

the speed of hockey pick decreases from 45.00 to 44.67 m/s in coasting 16 m across the ice. find the coefficient of kinetic friction between the puck and the ice

  What is the direction of the velocity vector

A cart of 0.5 kg hits a fixed cart of 1.5 kg with a velocity of 3 m/s in the north direction. Both carts get stuck together and move, What is the direction of the velocity vector

  What is the momentum of alpha particle

A small block with a mass of 0.120kg is attached to a cord passing through a hole in a frictionless, horizontal surface. The block is originally revolving at a distance of 0.50 m from the hole with a speed of 0.70m/s. The cord is then pulled from ..

  What is the maximum rotational speed

The Gravitron is an amusement park ride in which riders stand against the inner wall of a large spinning steel cylinder. At some point, What is the maximum rotational speed at which the riders will not slide up the walls of the ride

  Two boats start together and race across a 50.0 km

A hotel elevator ascends 170m with a maximum speed of 4.4m/s. Its acceleration and deceleration both have a magnitude of 1m/s2.

  Compute the approximate thickness of the hair

A human hair is placed directly in front of the opening of a laser pointer. The light has a wavelength of 647.8 nm. Determine the approximate thickness of the hair

  Find the forces of the two supports on the plank

A uniform wooden plank of mass 15kg and total length 10m rests on two supports. Find the forces of the two supports on the plank

  What are the x- and y-components of the electric field

What are the x- and y-components of the electric field at (x, y) = (0 m, +4 m)? (a)Two charges are placed on the x-axis: one is placed at x = 3 m and the other is at x = -3 m.

  How far must he now travel to reach base camp

Explorer is caught in a whiteout (in which snowfall is so thick that the ground cannot be distinguished from the sky) as returning to base camp.

  Find a horizontal force needed to pull a mass

find a horizontal force needed to pull a mass of 500 gram at constant velocity on a level surface and µk = 0.3?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd