What is the electrical power available

Assignment Help Mechanical Engineering
Reference no: EM13212492

You are designing a remote-area power supply based on a miniature wind turbine that is 20% efficient. Meteorological data indicates an average wind speed of 24 km/h at an air temperature of 10oC and pressure of 0.9 atm. The rotor has a diameter of 1.25 m. What is the electrical power available?

Reference no: EM13212492

Questions Cloud

What is the thrust in kn of this engine : Bypass air exits at 600 m/s while combustion air exits at 1000 m/s. What is the thrust in kN of this engine?
Analyze the potential costs and benefits : Analyze the potential costs and benefits of each option and explain how relative risk (from the investor s perspective) impacts the cost of capital for Genesis.
Sketch the cycle on p-v coordinates : One kilogram of air as an ideal gas executes a Carnot power cycle having a thermal efficiency 50%. The heat transfer to the air during isothermal expansion is 50 kJ. At the end of the isothermal expansion, the pressure is 574 kPa and the volume is..
Compute the ph change that takes place : calculate the pH change that takes place when a 100mL of (a) 0.0500M NaOH and (b) 0.0500M HCl is added to 400mL of a buffer solution prepared by mixing 0.200M NH3
What is the electrical power available : You are designing a remote-area power supply based on a miniature wind turbine that is 20% efficient. Meteorological data indicates an average wind speed of 24 km/h at an air temperature of 10oC and pressure of 0.9 atm. The rotor has a diameter of..
Compute the amount of energy in the form of heat : Calculate the amount of energy in the form of heat that is produced when a volume of 1.25 L of SO2(g) is converted to 1.25 L of SO3(g) according to this process at a constant pressure and temperature of 1.00 atm and 25.0 °C. Assume ideal gas behav..
What is the head loss in m : Drinking water at 10oC for an office complex must be pumped along a horizontal section of PVC pipe 50 m long at 2 m/s. The pipe has a nominal diameter of 62.5 mm and is Schedule 40. What is the head loss in m?
Write a brief memorandum to the tax files : Write a brief memorandum to the tax files that summarizes the advice you should give Ron - you notice that Ron has not reported any part of the award as income and has included the medical expenses in computing his itemized deductions.
Find the volume of the ring-shaped solid that remains : A cylindrical drill with radius r1 is used to bore vertically a hole through the centre of a sphere of radius r2.

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  Determine the work per kg of steam

steam turbine expands steam reversibly and adiabatically from 4Mpa,300C to 50C turbine exit. determine the work per kg of steam.

  Capabilities of solidworks motion manager

Prepare a power point presentation and a short report relating to the capabilities of Solidworks Motion Manager.

  Determine the maximum total bending moment

Determine maximum total bending moment (static plus dynamic) of the beam under steady-state conditions.

  Calculate the enthalpy change of the universe

calculate the enthalpy change of the universe during the process. Cp=Cv = 4.18 kj/kgK

  Calculate the power output in kw

Air enters a turbine at 40 kN/m2, 900 C, and leaves at 10 kN/m2. The flow is reversible and adiabatic. Inlet velocity is quite low and outlet velocity is 150 m/s through a cross-sectional area of 0.20 m2. Calculate the power output in kW.

  Determine the fluid viscosity of the substance

A plate, 0.001 in distant from a fixed plate, moves at 2 feet per seconds and requires a force of 0.04l bar per feet square to maintain this speed. determine the fluid viscosity of the substance between the plate.

  Calculate the contact forces at a and b

the 50-kg homogeneous smooth sphere rest on the 30 degree incline A and bears against the smooth vertical wall B. calculate the contact forces at A and B.

  Determine the minimum no of teeth required

Determine the minimum no of teeth required on pinion in order to avoid interference which is to gear with 1 a wheel to give a gear ratio of 3 to 1

  An ideal vapor-compression refrigeration system operates

An ideal vapor-compression refrigeration system operates at steady state with Refrigerant 134a as the working fluid. Superheated vapor enters the compressor at 30 lbf/in2, 20F, and saturated liquid leaves the condenser at 140 lbf/in2. The refriger..

  Which of these two processes will produce the largest amount

which of these two processes will produce the largest amount of work? (You must provide a full explanation for your choice).

  Explain finding metal removal rate

Finding Metal Removal Rate In an electrochemical machining operation, the frontal working area of the electrode is 2.5in squared

  Create a window in java

Create a window apllication in java

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd