What is the difference between the pressure that is acting

Assignment Help Mechanical Engineering
Reference no: EM13623607

A fairing for an optically perfect window for an airborne telescope is being tested in a wind tunnel. A manometer is connected to two pressure ports, one on the inner side of the window and the other port on the outside. the manometer fluid is water. During the testing at the maximum design airspeed, the column of water in the tube that is connected to the outside pressure port is 30cm higher than the column of water in the tube that is connected to the inside port.

a) What is the difference between the pressure that is acting on the inner surface of the window relative to the pressure acting on the outer surface of the window?

b) If the window has a total area of .5m^2, what is the total force acting on the window due to the pressure difference?

Reference no: EM13623607

Questions Cloud

Assume that the silicon can be treated as a semi-infinite : silica sio2 is formed on silicon as an electrically insulating layer for microelectronic devices. silica is formed when
Determine the potential energy of the system specify your : if one of the two electrons of a h2 molecule is removed we get a hydrogen molecular ion. in the ground state of an the
The membrane is broken and the air comes into a uniform : a tank has two rooms separated by a membrane. room a has 1kg of air and a volume of 0.5 m3 room b has 0.75 m3 of air
Is there convincing evidence that the majority of adult : an article states that movie attendance declined in 2005. a survey found that 720 of 1000 randomly selected adult
What is the difference between the pressure that is acting : a fairing for an optically perfect window for an airborne telescope is being tested in a wind tunnel. a manometer is
If alice measures 1 hour of time passing using a clock she : alice is located at a safe infinite distance from a black hole with a mass of 10 solar masses. she drops a clock on a
200 draws are made with replacement from a box of numbered : q1. in a game of chance a number of draws are placed with replacements from a box of tickets 500 of these tickets are
The friction component acts parallele to the plane : the bocks sits at rest on the sloping plane. the plane exerts two components of force on the block. the normal
A fair six-sided die with numbers 123456 is rolled : a fair six-sided die with numbers 123456 is rolled independently 500 times. approximate the probability that the sum is

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine vertical distance between two consecutive drops

Water drips at the rate of 5 drops per second from a leaking tap. Determine the vertical distance between two consecutive drops after the lower drop has attained a velocity of 3 m/s.

  Consider 20 kg of a 996 wt fe-04 wt c alloy that is cooled

consider 2.0 kg of a 99.6 wt fe-0.4 wt c alloy that is cooled to a temperature just below the eutectoid. a how many

  A temperature of 27c 3 litres of gas at the same

a vessel contains 2 litres of gas at a pressure of 300kpa and a temperature of 27c .3 litres of gas at the same

  The ball is in contact with the racket for 325 if the

a tennis racket hits a tennis ball with a force of where 1230 500 and is the time in milliseconds. the ball is in

  A magnetic brake system is used to slow the car to a speed

thecoaster cars are lifted up the initial hill which has a height of 85 feet and released at the top of the hill with a

  Distances are in meters how much work is done in the time

a particle moves along the path defined by x 3t and y 5t2 where t is the time in seconds and distances are in meters.

  The automobile shown has 1200kg mass with center of gravity

the automobile shown has 1200kg mass with center of gravity at point g and all wheel have the same 0.34m radius if the

  Estimate the smallest diameter of a rod

The compression strength of Kevlar 49 fiber is about one-eight of its tensile stress. Estimate the smallest diameter of a rod on which 12 um diameter Kevlar fiber can be wound without causing kinks on its compression side.

  A constant-thickness plate specimen of width w and

a constant-thickness plate specimen of width w and thickness t containing a crack has a compliance c given byc a1 a2

  A metal is being cast into a cylinder

A metal is being cast into a cylinder which is 10 cm in diameter and 20 cm tall. The mold is bottom-gated (see class notes for geometry)

  Determine the amount of heat that must be removed

A vessel with a volume of 0.0011 m3 is filled with dry saturated steam at a pressure of 95 kPa. It is then sealed and cooled to 250C. Determine the amount of heat that must be removed.

  Determine how much load this boat can carry without sinking

The hull of a boat has a volume of 150 m3, and the total mass of the boat when empty is 8560 kg. Determine how much load this boat can carry without sinking (a) in a lake and (b) in seawater with specific gravity of 1.03.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd