What is the change of energy stored in the battery

Assignment Help Mechanical Engineering
Reference no: EM13212155

A 12 Volt battery is charged by supplying 3 Amps over a period of 6 hours. What is the change of energy stored in the battery if the battery loses 400kJ of heat during charging.

Reference no: EM13212155

Questions Cloud

Determine the ration of the time taken of cutting : in a crank or slotted lever quick mechanism the distance between the fixed centre is 150 mm and driving crank is 75 mm. determine the ration of the time taken of cutting & return strake .
What is the expected annual cost savings in dollars : A 50 hp motor with an efficiency of 0.80 is to be replaced by a newer model motor with an efficiency of 0.90. The motor is expected to operate 3000 hours per year. The cost of electricity in our area is $0.06 per kWhr.
What is the efficiency of the turbine-generator : A small hydroelectric power plant produces electrical power at a rate of 30 kW. The plant utilizes a stream of water that drops 40 m from a lake to the turbine and flows at a rate of 100 kg/s. What is the efficiency of the turbine-generator?
What is the mass of the lead weight : What is the mass of the lead weight, if 100 J of heat is lost from the water after the weight falls a distance of 3 m.
What is the change of energy stored in the battery : A 12 Volt battery is charged by supplying 3 Amps over a period of 6 hours. What is the change of energy stored in the battery if the battery loses 400kJ of heat during charging.
Explain what is the heat of vaporization of the substance : A liquid substance has a vapor pressure of 450.0 mmHg at 262.0 degrees celsius and 760.0 mmHg at 325.0 celsius. a) what is the heat of vaporization of this substance? b) what is its normal boiling point?
Calculate marginal rate of technical substitution of labor : a. Graph the short run total product curves for each production function for 0  L  25 in the case where K is fixed at 4. b. Graph the marginal product of labor curves for each production function for 1  L  25. c. Do these production functions exh..
What are the values of these boolean expressions : Describe the steps for inserting a new item at the head of a linked list? Make sure you consider all possible incoming conditions.
Compute ground state energy : calculate ground state energy, 1st excited energy level, and wavelenght of an electronic transition between the 2 lowest energy states for an electron

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Explain an ideal vapor-compression refrigeration cycle

An ideal vapor-compression refrigeration cycle uses R-134a as the working fluid in an air-conditioning system. The refrigerant enters the compressor as a saturated vapor at 40 °F

  Explain square steel bar subjected to transverse biaxial

Consider a 4-in square steel bar subjected to transverse biaxial tensile stresses of 20 ksi in the x direction and 10 ksi in the y direction.

  Define ideal vapor compression refrigeration cycle

Ideal vapor-compression refrigeration cycle, An ideal vapor-compression refrigeration cycle, with ammonia as the working fluid, has an evaporator temperature of -20c and a condenser pressure of 12 bar

  Serpentine belt drive analysis and design

Determine the natural frequencies of the system-For the baseline system and find a design that changes the ?rst two natural frequencies more than any of the previous slight modi?cations.

  Explain finding metal removal rate

Finding Metal Removal Rate In an electrochemical machining operation, the frontal working area of the electrode is 2.5in squared

  Automatic control

DOF system and Find the differential equation describing the system

  Explain what will the ratio of the angle of twist

What will the ratio of the angle of twist be to that of the hollow shaft if the maximum shear stress in the material of 75 N / mm ^2 and what is the ratio of actual permissible shear stress?

  What tube diameter is required for the model

What tube diameter is required for the model if dynamic similarity is to be maintained between model and prototype?

  Calculate the final temperature in the small cylinder

If the filling is done rapidly, calculate the final temperature in the small cylinder, (a) assume that oxygen is an ideal gas with Cv= 5R/2 and (b) using accurate thermodynamic data for oxygen.

  Steady state thermal analysis

Steady State Thermal analysis can be use to simulate and obtain results to support the design optimization / objectives

  Theory and practice of the product

Derive at least four concept designs to satisfy the given specification. Use short written descriptions and simple sketches to illustrate your ideas

  Calculate the concentration of vacancies in pb

Calculate the concentration of vacancies in Pb at its melting temperature of 327oC. Assume an energy for vacancy formation of 0.55 eV/atom. Lead has an atomic weight of 207.2 g/mol and a density of 11.35 g/cm3.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd