What is electric field at the position of the second charge

Assignment Help Electrical Engineering
Reference no: EM13270802

A particle with a charge of +5.5*10^-6 C sets up an electric filed. A second particle with a charge of -3.0*10^-6 C is moved to a point 4.2 m a way from the first charge. what is the electric field at the position of the second charge?

Reference no: EM13270802

Questions Cloud

Explain what mass of water will evaporate : At 25 °C, water has an equilibrium vapor pressure of 23.8 mm Hg. If 2.500 g of water is sealed in an evacuated 10.0-L flask and heated to 25 °C, what mass of water will evaporate?
How much will you have to give the customer in 3 years : At the end of 3 years you need to return the deposit and the interest to the customer. How much will you have to give the customer in 3 years?
What would be the percentage change in the price : what would be the percentage change in the price of Bond Sam and Bond Dave? (Round your answers to 2 decimal places. (e.g., 32.16)) Percentage change in price of Bond Sam % Percentage change in price of Bond Dave %.
Explain what happens to some solute during crystallization : What happens to some solute during crystallization when too much solvent is evaporated and what do you do
What is electric field at the position of the second charge : A particle with a charge of +5.5*10^-6 C sets up an electric filed. A second particle with a charge of -3.0*10^-6 C is moved to a point 4.2 m a way from the first charge. what is the electric field at the position of the second charge
What is the torque on the loop from the magnetic field : A coil of wire contains 50 square turns, each one 5 cm long and 3 cm wide, and has a current of 30 A running through it. it is placed inside a magnetic field of 0.55 T at a 60 degree angle. what is the torque on the loop from the magnetic field
Explain a chromium-containing compound has the formula : A chromium-containing compound has the formula Fe(x)Cr(y)O4 and is 28.59% oxygen by mass. Find x and y.
What must the load be to extract maximum power from circuit : Consider a circuit that is connected to a phasor of 120V/0 degrees. The circuit feeds a 10 ohm resistor on the "hot" lead and then the circuit branches. One branch sees a 0.5A /60 degree phasor current source (oriented with "arrow oriented right)
Estimate the momentum of each photon : An electron and a positron, each moving at3.0×105m/s, collide head on, disappear, Determine the momentum of each photon

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine the cone angle that will match the line

(a) Determine the cone angle that will match the line to an infinite length biconical antenna. (b) For the cone angle of part (a), determine the two smallest cone lengths that will resonate the antenna.

  Design a circuit which performs error checking on a stack

A stack controller is a digital circuit in a computer that implements last in firstout (LIFO) storage for temporary data. It operates analogously to a stack of plates where you can put a new plate on the top of the stack or you can take a plate of..

  What are the values required for prescale pwmper

A PWM is to be programmed to output a signal with a pulse high width of 150 usec and a pulse low width of 250 usec. What are the values required for prescale (if any) PWMPER and PWMDTY An 8-bit configuration is used and the E-clock is 24 MHz.

  Determine input impedance and magnitude of the load voltage

A lossless transmission line with a characteristic impedance of 75 ohms is terminated by a load of 120 ohms. The length of line is 1.25 lamda. If the line is energized by a source of 100 V (rms) with an internal impedance of 50 ohms

  Find the magnitude and direction of resultant force

The forces 20N,30N,40N,50N and 60N are acting on one of the angular points of a regular hexagon towards the other five angular points taken in order. Find the magnitude and direction of resultant force

  What is the use of the opamp circuit

The anode of the diode is connected to the inverting node of the op-amp, while its cathode is connected to the output of the op-amp. Determine the expression of the output node potential as a function of the input node potential.

  Calculate also the closed surface fds and verify divergence

Consider a vector field, F(r,theta,phi)= ar*cos^2(theta)/r^2 for the volume V of a spherical shell, centered at the origin,with inner and outer radii 1 and 2 meters. a) Evaluate triple integral delta.F dv over v. b) Calculate also the closed surface ..

  What are the resultant values for the output period

A PWM unit is set-up with a pre-scale factor of 128. If the PWMPER register is loaded with 34 and the PWMDTY is loaded with 3, what are the resultant values for the output period and pulse width

  Determine the wave number and the angular frequency

the wavelenght of green light Lamda =550nm. Determine the wave number, the angular frequency,and the peroid of the wave. The speed of light is 3*10^8 m\s.

  What are leading manufacturers of tools for growing method

What crystal growth method is used for today's high brightness LEDs and what are the leading manufacturers of the tools for this growth method.

  Determine the noise on the output as percent fs

he sensor to be used has a transfer function of ? Q volts, where Q is in gal/min, and an output impedance of 2.0 k?. Tests show that the output of the sensor has 60 Hz noise of 0.8 V rms. Design a signal-conditioning system, including noise filter..

  Determine the networks equivalent resistance

A network connected between terminals a and b consists of two parallel combinations that are in series. The first parallel combination is composed of a 10-phm resistor and a 15-ohm resistor. The second parallel combination is composed.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd