What is cars average angular velocity for first three laps

Reference no: EM13659979

A car starts a race on a circular track and completes the first three laps in a counter clockwise direction in 618 seconds, finishing by an angular velocity of 0.0103 rad/sec. What is the cars average angular velocity for the first three laps?

Reference no: EM13659979

Questions Cloud

Discharge during charged resistor : How long will it take a charged 80-μF capacitor to lose 20% of its initial energy when it is allowed to discharge during a 45-Ω resistor?

What is the mass of the beam : A thin steel beam 8.0 m long is suspended from a crane and is undergoing tensional oscillations. Two75 kg steelworkers leap onto opposite ends of the beam, as shown in Fig. 13.29. If the frequency of torsionaloscillations diminishes by 30%, what is t..

Discover the total charge on the sphere : A solid non conducting sphere of radius r = 14 cm has a charge distribution q(r) ~ 15 nano-C/cubic meter *radius*radius. Discover the total charge on the sphere

Discover the electrical field and potential at the center : A 2-m radius semicircle conducting structure having a charge density of 19 nano-Coulomb per meter was set up by the semi circle centered at (0,0). Discover the electrical field and potential at the center.

What is cars average angular velocity for first three laps : A car starts a race on a circular track and completes the first three laps in a counter clockwise direction in 618 seconds, finishing by an angular velocity of 0.0103 rad/sec. What is the cars average angular velocity for the first three laps?

Diffraction pattern forms when light passes during slit : A diffraction pattern forms when light passes during a single slit. The wavelength of the light is 675 nm.

In a youngs double-slit experiment : In a Young's double-slit experiment, the wavelength of the light utilized is 515 nm (in vacuum), and the separation among the slits is 3.00*10-6m.

What rate is heat generated in the rod : A rod of 2.0-m length and a square (2.0 mm x 2.0mm) cross section is made of a material by resistivity of 6.0x10-8Ω times m. If a potential dissimilarity of 0.50 V is placed across the ends of the rod, at what rate is heat generated in the rod?

Most telephone cables are complete of copper wire : Most telephone cables are complete of copper wire of either 24 or 26 guage. If the resistace of 24-gauge wire is 137 Ω/mile and the resistance of 26-guage wire is 220Ω/mile, what is the ratio of the diamer of 24-guage wire to that of 26-guage wire?

User Account

All Pages