What electric field strength is needed between electrodes

Assignment Help Physics
Reference no: EM131001697

One type of ink-jet printer, called an electrostatic ink-jet printer, forms the letters by using deflecting electrodes to steer charged ink drops up and down vertically as the ink jet sweeps horizontally across the page. The ink jet forms 32.0μm -diameterdrops of ink, charges them by spraying 800,000 electrons on the surface, and shoots them toward the page with a horizontal velocity of 22.0 m/s.

Along the way, the drops pass through the long axis of two horizontal, parallel electrodes that are 6.0 mm long, 4.0 mm wide, and spaced 1.0 mmapart. The distance from the center of the electrodes to the paper is 1.30 cm . To form the letters, which have a maximum height of 6.0 mm, the drops need to be deflected up or down a maximum of 3.0 mm. Ink, which consists of dye particles suspended in alcohol, has a density of 800 kg/m3.

What electric field strength is needed between the electrodes to achieve this deflection?

Reference no: EM131001697

Questions Cloud

Written case analysis content and format case studies : Question: Written Case Analysis Content and Format Case Studies write the following information and number it 1 though 8 and use section headings: 2. The case number, case title, and class date.
What would you conclude from the pareto chart : 2. Using the following data, construct a a. Check Sheet, b. Histogram, and c. Pareto Chart
What value of rmax would be required : The electrical supply is 130 V (rms) at 61.0 Hz; the lightbulb is rated as "130 V,1100 W." What value of Cmax is required if the rate of energy dissipation in the lightbulb is to be varied by a factor of 5 from its upper limit of 1100 W? Assume t..
Situation calculus and a theorem prover : Finally, he has to press the BIG RED BUTTON (which only works when the two components are joined together) in order to cause something horrible to happen. Evil Robot's internal systems have been constructed using the situation calculus and a theor..
What electric field strength is needed between electrodes : One type of ink-jet printer, called an electrostatic ink-jet printer, forms the letters by using deflecting electrodes to steer charged ink drops up and down vertically as the ink jet sweeps horizontally across the page. The ink jet forms 32.0μm -..
Find the expectation and variance of the benefits : Find the expectation and variance of the benefits when (a) benefits are payable at the end of the year of death; (b) benefits are payable at the moment of death.
Find the smallest possible premium for each : Find the smallest possible premium for each, such that there is a probability of at least 0.95 that the total premiums will cover the total benefits on both contracts.
Determining the amount of andrew basis in the property : In the current year, Andrew received a gift of property from his uncle. At the time of the gift, the property had a FMV of $114,000 and an adjusted basis to his uncle of $70,000. After deducting the annual exclusion, the amount of the gift was $10..
What would be other valuable things to look at : For Online Physics 2110, Calculus Based, RODP in Tennessee is the webassign important on the final. If not, which it was not for the midterm, what would be other valuable things to look at?

Reviews

Write a Review

Physics Questions & Answers

  What orbital was the electron in before ejection

You ionize a hydrogen atom with a photon with wavelength 77.5nm. What orbital was the electron in before ejection

  Find with what force does the fluid leave the needle

A 2.06 Newton force is applied to the plunger of a hypodermic needle. If the diameter of the plunger is 1.10 centimeter and that of the needle 0.210 mm, Find with what force does the fluid leave the needle

  Find the velocity vector and position vector

A snowmobile is originally at the point with position vector 31.1 m at 95.0° counterclockwise from the x axis, find the following. velocity vector position vector

  Find the mass of sand added to the bucket

A 27.0 kilogram block is connected to an empty 1.00 kilogram bucket by a cord running over a frictionless pulley. Find the mass of sand added to the bucket

  What is the increase in temperature of the brakes

A 715 kg car moving at 28 m/s brakes to a stop. The brakes contain about 17 kg of iron that absorb the energy. What is the increase in temperature of the brakes

  What is the thermal energy of gas

500 J of work are completed to compress the gas while, in the same process, 1400 J of heat energy are transferred from the gas to the environment. Afterward, what is the rms speed of the molecules.

  Determine the energy rejected in KJ

A reversible power cycle whose thermal efficiency is 40% receives 50 kJ by heat transfer from a hot reservoir at 600 K and rejects energy by heat transfer to a cold reservoir at temperature Tc. Determine the energy rejected in KJ

  What focal length does the lens require

What focal length does the lens require

  What is the strength of the magnetic field acting on it

A proton circles Earth at an altitude of 500 km traveling at a speed of 2.0 X 10^7 m/s above the equator. What is the strength of the magnetic field acting on it?

  Determine what is the lowest frequency that it can play

If a piccolo has a length of 34 cm, what is the lowest frequency that it can play? Assume the piccolo is like a pipe that is open at both ends

  How long is the box in which the electron are confined

The electrons in a rigid box emit photons of wavelength 1484 nm during the transition. How long is the box in which the electron are confined

  Find out speed of the second puck after the collision

The first puck is deflected 35.8° to the right and moves off at 0.331 m/s. Find out speed of the second puck after the collision.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd