What are the net work and steam generator heat addition

Assignment Help Electrical Engineering
Reference no: EM13250757

A Rankine-cycle steam power plant has a 5-MPa/450C throttle and 10-kPa condenser pressure. What are the net work, steam generator heat addition, thermal efficiency, heat rate, and turbine exit quality? What is the Carnot efficiency corresponding to the temperature extremes for this cycle?

Solve for the cases of (a) an 85% efficient turbine, (b) an 85% efficient pump, and (c) both together. What conclusions may be inferred from the results?

Reference no: EM13250757

Questions Cloud

Calculate the l and c values of an l network : Calculate the L and C values of an L network that is to match a 9 ohm transistor power amplifier to a 75 ohm antenna at 122 MHZ.
How many units should be ordered each time : An order should be placed whenever total back-ordered demands sum to what?
Find the potential difference across the three resistors : Three resistors, 27, 49, and 79 ?, are connected in series, and a 0.51-A current passes through them. What is the potential difference across the three resistors
What role does an employer-sponsored wellness program play : What role does an employer-sponsored wellness program play in promoting employee health? Is it cost effective? Why or why not?
What are the net work and steam generator heat addition : A Rankine-cycle steam power plant has a 5-MPa/450C throttle and 10-kPa condenser pressure. What are the net work, steam generator heat addition, thermal efficiency, heat rate, and turbine exit quality
Federal antitrust statutes : Summarize two of the four Federal Antitrust Statutes (Sherman Act, Clayton Act, FTC Act or Robinson-Patman Act). How do they affect today's business?
Father of american policing-community policing emphasize : Which of the following provides a false image of policing that can negatively affect police image in a community and is a perception over which the police have little control? Who is considered to be the father of American policing? What type of stra..
Find the magnitude of the emf induced in the rod : A metal rod with a length of 26.0cm lies in the xy-plane and makes an angle of 34.5? with the positive x-axis, What is the magnitude of the emf induced in the rod
What are companies doing to control costs in this area : What are some of the key issues facing businesses today in terms of continuing to offer a competitive benefits package?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Compute the probability that the system will fail

Calculate the probability that the system will fail in 3,000 hours. Supposing no failure of any component occurs in 5,000 hours of operation. What would be your revised estimate of failure rates of the components in your system?

  Determine the worst case communication steps for algorithm

Devise a detailed algorithm for a ring with p nodes so that each node would atttain the final sum of original node values. Determine the worst case communication steps for the algorithm.

  Calculate the average seconds per day

Suppose station A and B are interconnected through two parallel unreliable links, where each link has a failure probability of 0.1. Calculate the average seconds per day when A and B lose communication.

  Compute the image frequency and its db of suppression

An AM broadcast receiver's pre-selector has a total effective Q of 90 to a received signal at 1180 kHz and uses an IF of 455 kHz. Calculate the image frequency and its dB of suppression.

  Discuss how the transduction could be done by a device

Signal transduction refers to any process of changing one signal to signal of another type. An example would be a series of pulsing lights into the sound for the word: "Help". Discuss how this transduction could be done by a device.

  Find current in serious electrical lrc circuit with a input

f(t) = t. B. f(t) = Sin wt find F(s). C. f(x) = y" + 2y' +y D. f(x) = y"' +4y" + 6y' + 9y. E. Given a serious electrical LRC circuit with an input source of 3Sin wt find the current i(t) expressed as I(s). Hint: use jwL and 1/jwC and w = 2pief

  What is the adt output for a temperature of 81 degrees

A HCS12 ATD is set to 10-bit unsigned mode. The voltage references are set to ground and 1.0V What is the ADT output for a temperature of 81 degrees The temperature sensor measures 0 to 100 degrees with an output of 10 mV/degree.

  What is the temperature of the steam leaving the turbine

1) 70 lbs/hr of steam at 300 psia, 500oF passes through a turbine which expands it to a pressure of 30 psia. If the turbine operates with an efficiency of 70%: a) What is the temperature of the steam leaving the turbine b) What is the quality (% v..

  A batch process which involves filling a tank with liquid

A batch process which involves filling a tank with liquid, mixing the liquid and draining the tank, is automated with a PLC. The specific sequence of events is as follows

  Define characteristics of a filter

Characteristics of a filter, A filter has the following characteristics: Attenuation = 3.0 dB from 0 Hz to 2 kHz. From 2 kHz to 20 kHz attenuation increases from 3 dB to 23 dB in a straight line when plotted on axes of power in decibels (vertical a..

  Find voltage regulation for load at leading power factor

A 3 phase Y connected alternator is rated at 1600 KVA, 13500 V. The armature resistance and synchronous reactance are 1.5 ohms and 30 ohms respectively. Calculate the % voltage regulation for a load of 1280 KW at 0.8 leading power factor.

  Calculate motor speed in revolutions per minute

4.What is the fundamental benefit of PLC controls over manual controls 5.Describe the differences between the two methods of scanning during PLC logic solving. Which method holds the advantage over the other

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd