What are the concentrations of proteins y and z

Assignment Help Electrical Engineering
Reference no: EM131249908

Consider a cascade of three activators X→Y→ Z. Protein X is initially present in the cell in its inactive form. The input signal of X, S x, appears at time t = 0. As a result, X rapidly becomes active and binds the promoter of gene Y, so that protein Y starts to be produced at rate β. When Y levels exceed a threshold K, gene Z begins to be transcribed and translated at rate β. All proteins have the same degradation/dilution rate γ.

(i) What are the concentrations of proteins Y and Z as a function of time?

(ii) What is the minimum duration of the pulse S x such that Z will be produced?

(iii) What is the response time of protein Z with respect to the time of addition of S x?

Reference no: EM131249908

Questions Cloud

Find the net power output and the required mass flow rate : A coal-fired power plant produces 25 kg/s steam at 3 MPa, 600?C in the boiler. It cools the condenser with ocean water coming in at 15?C and returned at 18?C, so the condenser exit is at 50?C. Find the net power output and the required mass flow r..
Brief workflow analysis for services in that organization : From the e-Activity, analyze two strategies to expand services to include long-term care in the organization you have chosen, and then outline a brief workflow analysis for the services in that organization.
Determining the wall street journal : Summarize an article from the Wall Street Journal that has a and legal issue and explain how it affects business. You might want to do this in Microsoft Word and then past your answer into the Catalyst box below.
Resume that truly represents your strengths and leadership : Purpose: Prepare a professional resume that truly represents your strengths, skill sets, and leadership
What are the concentrations of proteins y and z : What are the concentrations of proteins Y and Z as a function of time? - What is the minimum duration of the pulse S x such that Z will be produced?
Find the required fraction of extraction flow in the turbine : An open FWH receives steam at 1 MPa, 200?C from the turbine and 1 MPa, 100?C water from the feed water line. Find the required fraction of the extraction flow in the turbine.
Critically evaluating a classic argument : discuss how you plan to show how your chosen author uses ethos, pathos, logos, etc.  Choose one specific example of this support, and explain how it was effective in the essay's argument.
Analyze the role of innovation in executing the change : Analyze the role of innovation in executing this change. Assess managing diversity in the workplace, particularly with new workers coming from Miami.
Strategic approaches to conflict handling : Outline the five strategic approaches to conflict handling and discuss the circumstances in which each would be most appropriate?

Reviews

Write a Review

 

Electrical Engineering Questions & Answers

  What will be minimal load resistance to ensure power deliver

With the internal resistance of 0.14Ω, what will be the minimal load resistance to ensure at least 84 percent of the power delivered by the battery goes to the load

  Find the shaft speed nm for full-load conditions

A 50-kW 440-V 50-Hz two-pole induction motor has a slip of 6 percent when operating at full-load conditions. At full-load conditions, the friction and windage losses are 520 W, and the core losses are 500W. Find the shaft speed nm for full-load ..

  Design an armstrong indirect fm modulator to generate fm

design an Armstrong indirect FM modulator to generate an FM carrier with a carrier frequency of 96 MHz and Df= 20 kHz. A narrow-band FM generatorwith fc = 200 kHz and adjustable Df in the rangeof 9 to 10 Hz is available.

  Design the datapath which will add the value in register

Design the datapath which will add the value in register A to the value in either of the registers B or C and store the value back in A. The input to the datapath should be a control signal s: if s = 1 then A + B should be calculated; If s = 0 the..

  Convert the temperature range into an 8-bit digital word

Devise a system that will convert this temperature range into an 8-bit digital word with conversion from 00H to 01H at 200°C and from FEH to FFH at 350°C . An ADC is available with a 2.500-V internal reference. At 200°C a type K TC produces 8.13 m..

  Derive an expression for the cross correlation function

Derive an expression for the cross-correlation function of the two outputs- Derive an expression for the cross-spectral density of the two outputs.

  Find average power loss in line before and after load added

The power factor of the added load is to be adjusted so that the overall power factor of the factory is 0.96 lagging. The factory is fed from a line having an impedance of 0.02 + j0.16 O. The voltage at the factory is maintained at 480 V(rms).

  What is the rms voltage that must be applied by a ac supply

a circuit with a resistor is connected to a DC supply and a Current of 2A and producing a heat. What is the rms Voltage that must be applied by a AC supply to produce 3 times this heat if all other conditions remain the same

  Briefly describe how this process can be used to describe

The equal area criteria to determine if a synchronous machine will remain "stable" after a disturbance is essentially an application of the principle of conservation of energy. Very briefly describe how this process can be used to describe the res..

  Briefly explain the main differences between pal and pla

Why can a PLA implement more logical functions than a PAL with the same number of AND-OR gates? c. Why is a PLA slower than a PAL with the same number of AND-OR gates (of similar technology)?

  Find the poles and zeros of h and plot in s-plane

The steady state solution of stable systems is due to simple poles in the jO axis of the s-plane coming from the input. Suppose the transfer function of the system is: H_ (s)= (Y(s))/(X(s)) = 1/([(s+1)^2]+4))

  Determine and compare the intrinsic impedance

Determine and compare the intrinsic impedance, attenuation constant, and skin depth of copper [σcu =5.80 × 10^7 (S/m)], silver[σag=6.15 × 10^7 (S/m)], and brass[σbr=1.59 × 10^7 (S/m)]

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd