What acceleration is transmitted to the instrument

Assignment Help Mechanical Engineering
Reference no: EM13707023

A sensitive instrument with mass 113 kg is to be installed at a location where the acceleration is 15.24 cm/(s^2) at a frequency of 20 Hz. It is proposed to mount the instrument on a rubber pad with the following properties: k=2802 N/cm and damping ratio = 0.1. What acceleration is transmitted to the instrument?

Reference no: EM13707023

Questions Cloud

What is the magnitude of the object''s acceleration : During liftoff, a hot-air balloon accelerates upward at a rate of 3.5m/s2. What is the magnitude of the object's acceleration after it is released
Find the power dissipated by the external resistor : A battery with an Emf of 22.0 V has an internal resistance of r. It is connected to an external resistance of 280. Determine the power dissipated by the external resistor
The maximum modulus of elasticity for a copper crystal : The maximum modulus of elasticity for a copper crystal is 195 GPa. What tensile stress is required along the corresponding crystallographic direction in order to increase the interatomic separation distance by 0.09% ?
Calculate the heat transfer required for this process : A rigid 12L vessel initially contains a mixture of liquid water and vapor at 120C with 15.0 percent quality. The mixture is then heated until its temperature is 155C. Calculate the heat transfer required for this process.
What acceleration is transmitted to the instrument : A sensitive instrument with mass 113 kg is to be installed at a location where the acceleration is 15.24 cm/(s^2) at a frequency of 20 Hz. It is proposed to mount the instrument on a rubber pad with the following properties: k=2802 N/cm and damping r..
Find the specific heat at constant pressure for water : Water at 100 kPa and 400 K is heated electrically, adding 700 kJ/kg in a constant pressure process. Find the final temperature using- The ideal gas table A-8 (Ideal gas properties of various substances, Entropies at 0.1 MPa (1-bar) pressure, mass bas..
What is the evidence for the origins of hominids : What is the evidence for the origins of hominids and the transition from Australopithecus to homo. offer an explanation for the profusion of categories in both genera up to the appearance of homo erectus.
Write a report that summarizes the organization''s products : Research a sport business organization or individual and write a report that summarizes the organization's products, services, major accomplishments, and other relevant information in relation to the sport industry.
Reduced temperature and pressure : Is it a good approximation to consider helium at 250 kPa and 300 K as an ideal gas? Explain by considering it's reduced temperature and pressure (use Table A-2(Critical Constants)). At this temperature and pressure, how many moles of helium are in 0...

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  In a well-insulated continuous glass melter propane gas

in a well-insulated continuous glass melter propane gas c3h8 is used as fuel with 100 excess 300k air for combustion.a

  The only question is the strength of the block in

limestone blocks approximately 8 in. wide by 14 in. long by 6 in. high are sometimes used in constructing dry stacked

  List the forms of energy transfer involved in this system

in a rigid tank water is heated by a benson burner while being stirred by a paddle wheel. initially the internal energy

  Find the kinetic energy in btu if this bullet was fired

a 9mm bullet with mass .28 oz.0175lbm exits a pistol at 1250 fts. find the kinetic energy in btu. if this bullet was

  Air at a pressure of 400kpa and a temperature of 700 degree

air at a pressure of 400kpa and a temperature of 700 degree celsius expands in a turbine at steady state to a pressure

  A machine gun fires 174 g bullets at a speed of 610 ms at a

two firefighters must apply a total force of 620 n to steady a hose that is discharging water at the rate of 3150 lmin.

  The operating temperature of sae 50oil p890kgm3 is to be

a full journal bearing360degree has a diameter of 10mm a length of 5 mm and supports load of 20 n. the sormmerfield

  What is the percent change in viscosity per degree celsius

what is the percent change in viscosity per degree celsius for a vg-32 mineral turbine oil at 10c? at 120c? what are

  A temperature scale is defined by the equation tsti lim

a temperature scale is defined by the equation tsti lim pi-0 pspi1.36609 as in gas thermomery but now the reaumur

  A steam turbine is operating at a steady state inlet

a steam turbine is operating at a steady state. inlet pressure and temperature are 40 bar and 400 degrees c

  Air enters a compressor operating at steady state at 17oc 1

air enters a compressor operating at steady state at 17oc 1 bar and exits at a pressure of 5 bars. if there are no

  A centrifugal pump located above an open water tank is used

a centrifugal pump located above an open water tank is used to draw water using a suction pipe 8 cm diameter. the pump

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd