User Account

All Pages

Water exits the system as a 45mpa saturated vapor quality

Assignment Help Mechanical Engineering
Reference no: EM13630711

You have a desuperheater that has a steady-flow, is an adiabatic mixing process that mixes superheated water vapor with a cold liquid, together they make a stream of saturated water vapor (wet steam). The superheated water vapor enters the system at 5MPa, 400C with a mass flow rate of 0.5 kg/s. Water exits the system as a 4.5MPa saturated vapor (quality is 100%). Find the required mass flow rate of the compressed liquid.

Reference no: EM13630711

Questions Cloud

Draw a simplified version of the given network that will : infinite resistor network is shown below composed of resistors of resistance r0 on the horizontal lines and 2r0 on the
Certain microalloyed steels contain small additions of : certain microalloyed steels contain small additions of vanadium or niobium that permit the grain size to be reduced to
The space between two horizontal parallel flat plates 05 cm : the space between two horizontal parallel flat plates 0.5 cm apart is filled with oil of viscosity ?micro 0.05 kgm.s.
An air conditioner operating at steady state maintains a : an air conditioner operating at steady state maintains a dwelling at 20 degrees celsius on a day when the outside
Water exits the system as a 45mpa saturated vapor quality : you have a desuperheater that has a steady-flow is an adiabatic mixing process that mixes superheated water vapor with
A single degree of freedom translational vibrating system : a single degree of freedom translational vibrating system has a concentrated mass weighing 77.2 lbs a spring constant
A 988 kg satellite orbits the earth at a constant altitude : a 988 kg satellite orbits the earth at a constant altitude of 106 km. how much energy must be added to the system to
A power cycle operates between a lakes surface water at a : a power cycle operates between a lakes surface water at a temperature of 300 k and water at a depth whose temperature
After the collision the orange disk moves along a direction : two shuffleboard disks of equal mass one orange and the other yellow are involved in a perfectly elastic glancing

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine all of the reactions and deflection at mid-span

a continuous beam abc is fully restrained at point a and restrained at point c in all senses except that it may move in

  Determine a the final temperature of the steam in the tank

118 an insulated rigid tank whose volume is 0.5 m3 is connected by a valve to a large vessel holding steam at 40 bar

  How many workers trucks and jack hammers should be assigned

a gold processor has three mines of gold ore mine a mine b and mine c. in order to keep his plant running at least 200

  Find a condensing surface area required b circulating water

a one shell two tube pass surface condenser is required to handle the exhaust from a steam turbine developing 14 300 kw

  The gap between them is filled with molten polymer

Two flat, rectangular plates with a lateral dimension w*l lie parallel, one above the other, a distance h apart. The gap between them is filled with molten polymer.

  A balloon in the upper atmosphere is filled with water

a balloon in the upper atmosphere is filled with water vapor with a speci?c volume of 10 m3 kg. a if its volume is 25

  Find1 the work performed by the gas b the increase in the

an isobaric heating process raises the temparature of one of one mole of an ideal gas by delta t 100 k. the heat

  What is the airspeed of the plane

The airspeed of an aeroplane is measured with a Pitot tube. The plane is flying at an altitude of 10000m, and the Pitot tube measures a gauge pressure of p = 10kPa. What is the airspeed of the plane?

  Fea if you find another software easier to do fea in then

if you find another software easier to do fea in then go ahead and use that instead we are just interested in the

  Find the temperature at the interface

a. Find the temperature at the interface between the rod and sleeve and on the outer surface. b. What is the temperature at the center of the rod?

  Which is that hardness is measured as the applied load

one of the inspectors in the quality control department has frequently used the brinell and rockwell hardness tests for

  The temperature disribution along a cylindrical rod of

the temperature disribution along a cylindrical rod of length l is given by the function txaxlbx2lcsinpixlde-alphaxl 0

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd