Vertical wall with a hinge at one end

Reference no: EM13659315

A horizontal beam 4m long is attached to a vertical wall with a hinge at one end, and a body of weight 500N hangs from the outer end. The beam is supported with a guy wire from its outer end to the wall directly above the beam.

1. If the wire were now to be fastened at distance of 0.5m below this point in part A, with the beam remaining horizontal, what would the new tension in the wire be? Ignore the weight of the beam.

2. If the tension in the wire is not to exceed 1000N, what is the minimum height (h) above the beam at which it might be fastened to the wall?

Reference no: EM13659315

Questions Cloud

Energy removed from an engine as heat during one cycle : If the energy removed from an engine as heat during one cycle is3.4x102 J, how much energy should be added to the engine through one cycle in order for it to operate at 25 percent efficiency? Answer in units of J.

Solenoid of radius-discover its inductance : A solenoid of radius 2.2 cm has350 turns and a length of 17 cm. Discover its inductance. Find the rate at which current should change through it to produce an emf of 75 mV.

How far from the van is the object really located : The owner of a van installs a rear-window lens that has a focal length of -0.310 m. When the owner looks out during the lens at an object located directly behind the van, the object appears to be0.260 m from the back of the van, and appears to be 0.3..

Decide the magnitude of the doors angular acceleration : A rotating door is made from four rectangular sections. The mass of all section is 85kg. A person pushes on the outer edge of one section by a force of F = 68N that is directed perpendicular to the section. All section measures 1.2m from the axis ..

Vertical wall with a hinge at one end : A horizontal beam 4m long is attached to a vertical wall with a hinge at one end, and a body of weight 500N hangs from the outer end. The beam is supported with a guy wire from its outer end to the wall directly above the beam.

Imagine the motion of the human forearm in throwing a dart : Imagine the motion of the human forearm in throwing a dart. Because of the force M applied by the triceps muscle, the forearm can rotate regarding an axis at the elbow joint. Suppose that the forearm has the dimensions 0.28m from axis of elbow to dar..

Suppose that the collision is entirely elastic : An object (A) of mass 0.1 kg strikes a second objects (B), of mass0.3 kg that is initially at rest. Mass A has an initial velocity of+ 2 m/s. Suppose that the collision is entirely elastic. Compute and describe the final velocities for the two object..

What is the kinetic energy of the proton : In a certain cyclotron a proton moves in a circle of radius 0.900 m. The magnitude of the magnetic field is 1.50 T. What is the kinetic energy of the proton? What is the oscillator frequency?

Negligible heat loss during the sides of the bar : One end of a brass bar is maintained at 296°C, while the other end is kept at a constant however lower temperature. The cross-sectional area of the bar is4.00 10-4 m2. Because of insulation, there is negligible heat loss during the sides of the bar.

User Account

All Pages