User Account

All Pages

Using the ideal gas model for air and assuming isothermal

Assignment Help Mechanical Engineering
Reference no: EM13626998

A rigid tank, initially evacuated, develops a small hole, and air slowly leaks in from the surroundings at a mass flow rate proportional to the pressure difference in the tank and of thesurroundings. Using the ideal gas model for air, and assuming isothermal conditions in the tank, derive an expression for the pressure in the tank as a function of time.

Reference no: EM13626998

Questions Cloud

Determine the exit velocity in fts and the exit temperature : steam at 500 lbfin2 500 f enters a well insulated valve operating at steady state with a mass flow rate of .11 lbs
For a parallel structure of identical components the system : for a parallel structure of identical components the system can succeed if at least one of the components succeeds.
In addition friction does -250 j of work on him in both : a 55.9-kg skateboarder starts out with a speed of 1.83 ms. he does 98.3 j of work on himself by pushing with his feet
A system of equivalent mass 30kg has a natural frequency : a system of equivalent mass 30kg has a natural frequency of 120radsec and damping ratio of 0.12. the system is subject
Using the ideal gas model for air and assuming isothermal : a rigid tank initially evacuated develops a small hole and air slowly leaks in from the surroundings at a mass flow
A golf ball is selected at random from a golf bag if the : a golf ball is selected at random from a golf bag. if the golf bag contains 1 green balls6 brown balls and 8 orange
A steel ring of 250mm diameter has a width of 50mm and a : a steel ring of 250mm diameter has a width of 50mm and a radial thickness of 5mm. it is split to leave a narrow gap of
In being launched from rest it moves through a distance of : a fighter jet is launched from an aircraft carrier with the aid of its own engines and a steam-powered catapult. the
The pressures of the nitrogen are low enough to treat it as : nitrogen gas is flowing in a 50mm diameter pipe at the rate of 0.05kgs. the nitrogen flows through a partially closed

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The steam expands through the first turbine stage to 07

consider an ideal rankine cyle steam power plant with reheat. superheated vapor enters the first turbine stage at 10

  What fraction n of the weight of the jet airplane is the

what fraction n of the weight of the jet airplane is the net thrustnozzle thrust t minus air resistance r required for

  Determine the fraction of the prototype speed in air at

measurements of drag force are made on a model automobile in a towing tank filled with fresh water. the model length is

  Determine the resultant of the three forces

gusset plate Determine the resultant of the three forces tha must be carried by the gusset plate. 30 degrees off of the wall and F1, F1 = 10k, F2 = 12k, F3 = 18k

  Now the valve is opened and the entire system is allowed to

a 2 m3 tank containing nitrogen at 25oc and 500kpa is connected through a valve to another tank containing 3kg of

  A gas in an insulated tank is separated from an evacuated

a gas in an insulated tank is separated from an evacuated region by a membrane. the membrane is removed and the gas is

  Determine the final gauge pressure of the helium given the

a tank contains helium at 103degrees celcius and 10.9kpa gauge . the helium is heated in a process by heat transfer

  Determine a velocity using bernoullis equation

If I take measurements using a Pitot Tube and get results for pressures Horizontal In, Horizontal Out, Vertical In, and Vertical Out all in inches of mercury. How do I take these pressures and determine a Velocity using Bernoullis equation?

  To remove the organic gases and the particles the flow is

in the production of ethanol from corn the solids left after fermentation are dried in a continuous-flow oven. this

  What is the average friction factor in the duct

Air enters an adiabatic duct of L/D = 40 at V1 = 170 m/s and T1 = 300 K. The flow at the exit is choked. What is the average friction factor in the duct?

  An air cored solenoid has 100 turns of wire the core has a

an air cored solenoid has 100 turns of wire the core has a diameter of 2cm and the length of the winding over the core

  Estimate a the percentage chain in toque accompanying a 20

an axial turbine of high hub-tip ratio runs with zero degree reaction and peak efficiency at design flow and speed. the

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd