Two-phase liquid-vapor mixture of refrigerant

Assignment Help Mechanical Engineering

Reference no: EM13707386

A tank contains a two-phase liquid-vapor mixture of Refrigerant 134a at 10 bar. The mass of saturated liquid in the tank is 32 kg and the quality is 50%. Determine the volume of the tank, in m3, and the fraction of the total volume occupied by saturated vapor.

Reference no: EM13707386

Questions Cloud

Energy balance-property tables and phase changes : Energy balance, property tables, phase changes. Consider water in a pot on an alien planet. You will the pot with 1.002 L (.001002 m3) of water initially at 20°C and 75 kPa (their atmospheric pressure is different than ours). How much mass is in the ..

Two well-insulated tanks filled with carbon monoxide : Two well-insulated tanks filled with carbon monoxide (CO) gas are connected by a valve. In tank A, 1 kg of gas is stored at 100 kPa and 300 K. In tank B, 5 kg of gas are stored at 500 kPa and 870 K. The valve is opened, and the contents of the two ta..

Determine the total mass of nitrogen : Determine the total mass of nitrogen (N2), in kg, required to inflate all four tires of a vehicle, each to a gage pressure of 180 kPa at a temperature of 25oC. The volume of each tire is 0.6 m^3, and the atmospheric pressure is 1 atm.

Employing the ideal gas equation of state : One kilogram of air in a piston-cylinder assembly undergoes a thermodynamic cycle consisting of three processes: Process 1-2: Constant specific volume At state 1, the temperature is 323 K, and the pressure is 1 bar. At state 2, the pressure is 2 bar...

Two-phase liquid-vapor mixture of refrigerant : A tank contains a two-phase liquid-vapor mixture of Refrigerant 134a at 10 bar. The mass of saturated liquid in the tank is 32 kg and the quality is 50%. Determine the volume of the tank, in m3, and the fraction of the total volume occupied by satura..

Kinematic viscosity : Kinematic viscosity (select all that apply)

Calculate the inlet density and initial velocity of methane : Pure methane initially at 3000 psi, 65 oF enters a pipeline of 12-in inside diameter, at a rate of 70 lb/s. Using the generalized compressibility factor chart, calculate the inlet density and initial velocity of methane.

Piston-cylinder assembly undergoes two processes in series : One kg of air in a piston-cylinder assembly undergoes two processes in series from an initial state where p1 = 0.5 MPa, T1 = 227oC. Constant-temperature expansion until the volume is twice the initial volume.

Determine the temperature at which the liquid : A rigid tank with a volume of 1.8 m^3 contains 15 kg of saturated liquid-vapor mixture of water at 2 bar. Now the water is slowly heated. Determine the temperature at which the liquid in the tank is completely vaporized. Show the process on a T-v dia..

User Account

All Pages