Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A vehicle is stuck on the railroad tracks as a 430,000 lb locomotive is approaching with a speed of 75mph. As soon as the problem is detected, the locomotive's emergency brakes are activated, locking the wheels and causing the locomotive to slide.
If the coefficient of kinetic friction between the locomotive and the track is 0.45, what is the minimum distance d at which the brakes must be applied to avoid a collision?
Treat the locomotive as a particle and assume that the railroad tracks are rectilinear and horizontal.
Estimate the infiltration flow rate if the window is partially open (assuming the window open area is 2 meter squared).
During the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the work input during this process. R(air)=287j/KgK
Calculate the force required in direct extrusion of 1100-O aluminum from a diameter of 6 in. to 2 in. Assume that the redundant work is 30% of the ideal work of deformation, and the friction work is 25% of the total work of deformation.
Determine if the shaft has infinite fatigue life. If not, determine the number of cycles to failure. Also determine the safety factor for first cycle yield and draw a free body diagram, shear and moment diagrams, and graph the loads on the shaft..
Water enters a 2 meter diameter pipe at a temperature of 23 deg C. The water leaves the pipe at a temperature of 97 deg C The laminar flow rate is such that the Reynolds number is 800. What is the mass flow rate?
Determine the rate of heat transfer to the mid-stage cold head and determine the rate of heat transfer to the cold head
What is differential levelling? list the procedure for carrying out a differential levelling exercise where one point is beyond the range of the instrement . 100 word limit
A plate, 0.001 in distant from a fixed plate, moves at 2 feet per seconds and requires a force of 0.04l bar per feet square to maintain this speed. determine the fluid viscosity of the substance between the plate.
Applied Loads, Young's modulus, Poisson's ratio, The Young's modulus and the Poisson's ratio for copper are 124.8 GPa and 0.36 respectively. When a tensile load is applie to a 1.5cm diameter copper rod
Assuming the plant operates on the ideal vapor-compression cycle using refrigerant 134-a between the pressure limits of 120 and 700 kPa, determine
A jack-screw has a handle 35 inches long and a pitch of 7/32 inches. If a pull of 15 lbs. is required at the end of the handle to lift a 3,000 lbs.
Investigating A Dynamic Movement in Polar Coordinates
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd