User Account

All Pages

Thickness for a unit working stress

Assignment Help Electrical Engineering
Reference no: EM13867101

A cast-iron cylinder of 300mm bore carries a pressure of 30 Newtons per square millimetre; what should be its thickness for a unit working stress of 25 newtons per square millimetre?

Reference no: EM13867101

Questions Cloud

Identify the starting year and the population at that time : What are the likelihood of your results? Would it be expected that the percent growth rate would stay constant over such long periods and Write it up in a neat paper with the graph copied and pasted into the paper. If you got the population from a ..
Determine maximum speed : Then, assuming the engine could be started determine what maximum speed it could run at in the coldest conditions before it warmed up, neglecting all other losses, if the engine could deliver 60 kW of power. Parameters:
Do you feel ethics were compromised in this situation : Write a 1,050- to 1,400-word paper that answers the following questions as they apply to each scenario. Do you feel ethics were compromised in this situation
What is a monohybrid cross? : What is a monohybrid cross?
Thickness for a unit working stress : A cast-iron cylinder of 300mm bore carries a pressure of 30 Newtons per square millimetre; what should be its thickness for a unit working stress of 25 newtons per square millimetre?
Power system-voltage changes : How is per unit impedance affected in a power system when the voltage changes, if at all?
Hontribute to the possibility of audit deficiencies? : How do the rules for determining the impairment of long-lived assets explained in the chapter contribute to the possibility of audit deficiencies? Is this an area where GAAP should be converged with IFRS, or vice versa?
Economic worth-present value method : Analyse the economic worth of this investment using the Present Value Method and suggest whether to proceed or to cancel the investment plan.Compound Interest Table for 8%
Declare a stock dividend rather than a stock split : Describe the effects that this transaction would have had on the company's financial statements. Assume that 600 million shares were outstanding at the time of the transaction, trading at a stock price of $ 33. Why might the board of directors have d..

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Compute the output response of the system

Find H[k], the 10 point DFT of h[n] and compute the output response of the system y[n], 0 ≤ n ≤ 4, using the convolution sum.

  What does a small delay spread indicate about characteritics

What does a small delay spread indicate about the characteristics of a fading channel. If delay spread is 1microsecond, will two different frequencies that are 5 MHz apartexperience correlated fading.

  How many shots of tire must be taken to correctly capture

A car travels at 30 km/hour. The diameter of the tire is 50 cm. How many shots of the tire must be taken to correctly capture the motion of the wheels

  Determine the gain of the antenna in db

One of the home satellite services uses a dish antenna having a diameter of 18" (0.457 m) and frequency of 12.45 GHz. If the illumination efficiency is 70%, determine the gain of the antenna in dB

  What is the probability that a sample of five units selected

A lot of size N= 30 contains three nonconforming units. What is the probability that a sample of five units selected at random contains exactly one nonconforming unit what is the probability that it contains one or more non conformances

  Determine the impurity doping concentration in each region

A silicon abrupt junction in thermal equilibrium at T=300 K is doped such that Ec-Ef=0.21 eV in the n region and Ef-Ev=0.18eV in the p region. (a) draw the energy band diagram of the pn junction.

  Detect whether a pattern of at least three adjacent 1s occur

Design a combinational circuit that can detect whether a pattern of at least three adjacent 1s occur anywhere in an 8-bit input, and that outputs a 1 in that case. The inputs are a , b, c, d, e, f, g, and h, and the output is y.

  Why single interrupt is interpreted as multiple interrupts

Assume that the I bit for external hardware interrupt IRQ is enabled and is low-level triggered. Explain how this interrupt works when it is activated. How can we make sure that a single interrupt is not interpreted as multiple interrupts

  Define circuit using both a state diagram and a state table

A circuit must detect a 01 sequence. The sequence sets z = 1, which is reset only by a 00 sequence. For all other cases, z = 0. For example, for input sequence as follows, the corresponding output sequence would be: x = 010100100

  Determine what is the density of the liquid

A wooden cylinder 30.0 cm highs gloats vertically in a tube of water (density = 1.00 g/cm cube). The top of the cylinder is 14.1 cm above the surface of the liquid. What is the density of the wood

  Determine all prime implicants and essential prime implicant

For the equation F(a,b,c,d) = ab'c' + abc'd + abcd + a'bcd + a'bcd', determine all prime implicants and all essential prime implicants: (a) using a K-map, (b) using the tabular method.

  Determine the values of the equalized output pulses

The result of transmitting a single pulse through a channel is a received sequence of pulses at the sampling instants given by {0.1, 0.3, -0.2, 0.96, 0.4, -0.1, 0.1} where the leftmost sample is the earliest. The value 0.96 corresponds to the main..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd