The viscoelastic response of a common orthopedic polymer is

Assignment Help Mechanical Engineering

Reference no: EM13631197

The viscoelastic response of a common orthopedic polymer is represented using a Maxwell model, so that the spring constant represents the material elastic modulus E (MPa) and the dashpot constant represents the material coefficient of viscosity, ? (MPa-s). A uniaxial tensile test is performed to examine the creep response of the material. A step increase in tensile stress of 6.5 MPa is applied at time 0 and maintained for 20 seconds. The sample reaches a maximum engineering strain of 15% at 20 seconds. At 20 seconds the stress is removed, and the strain immediately drops to a level of 6%.

a. Sketch the stress-time and strain-time curves, labeling the transition points with actual values for stress and strain.

b. Using the data from your graphs, calculate the values for the elastic modulus, E, and the coefficient of viscosity, ?.

Reference no: EM13631197

Questions Cloud

A hair dryer consumes 1200w of electric power when running : a hair dryer consumes 1200w of electric power when running the inlet volume flow rate and the exit velocity of air are

Consider a steam power plant that operates on a : consider a steam power plant that operates on a regenerative ranking cycle and has a net power output of 150mw .steam

A compressor is used to bring saturated water vapor at 150 : a compressor is used to bring saturated water vapor at 150 lbfin2 up to 2500 lbfin2 where the actual exit temperature

The turbine exit pressure is 10kpa the overall efficiency : a geothermal power plant is supplied with water at a well bottom temperature of 225 degrees c and a pressure of 8 mpa.

The viscoelastic response of a common orthopedic polymer is : the viscoelastic response of a common orthopedic polymer is represented using a maxwell model so that the spring

Calculate first the temperature at the center of one face : a cube of aluminum 10 cm on each side is initially at a temperature of 300degc and is immersed in a fluid at 100degc.

A he ion is placed in an excited state so that its : a he ion is placed in an excited state so that its remaining electron occupies the n5 state. the electron can make a

A steel thermal diffusivity 000001172 k43 cylinder 10 cm in : a steel thermal diffusivity 0.00001172 k43 cylinder 10 cm in diameter and 10 cm long is initially at 300degc. it is

A steam turbine is operating at a steady state inlet : a steam turbine is operating at a steady state. inlet pressure and temperature are 40 bar and 400 degrees c

User Account

All Pages