The velocity of water, The velocity of water in a 2-cm-dia

The velocity of water

Assignment Help Mechanical Engineering

Reference no: EM13707371

The velocity of water in a 2-cm-dia pipe is 20 m/s. If the pipe enlarges to 5-cm-dia, the velocity, in m/s, will be: (show work)

Reference no: EM13707371

Questions Cloud

Determine the electric current in the wire : A current carrying 10 gauge (.1013-in dia) copper wire is insulated with a .05 in thick layer of rubber. The maximum temperature of thr rubber is 200F when the temperature of the air is 120F. The external heat transfer coefficient can be taken as 4 B..

What is the composition of the liquid phase : At a given temperature, a hypothetical isomorphous A-B alloy of composition 40wt% B - 60wt% A is found to be 66wt% (B) alpha phase and 34wt% liquid phase, L. If the composition of the alpha phase is 13wt% B - 87wt% A, what is the composition of the l..

Piston on the air during the compression stroke : At the beginning of the compression stroke, the volume of a certain diesel engine cylinder is 1.000 liter and it is filled with air at 300 K and 100 kPa absolute. At the end of the compression stroke the air is at 800 K and 4280 kPa absolute.

Determine the initial temperature of the air in the cylinder : Air (assumed to be an ideal gas) is contained in a piston-cylinder assembly at an initial state of 1 bar with a volume of 1 m3. The mass of air contained in the cylinder is 1 kg. During any expansion or compression of the air, the pressure remains co..

The velocity of water : The velocity of water in a 2-cm-dia pipe is 20 m/s. If the pipe enlarges to 5-cm-dia, the velocity, in m/s, will be: (show work)

Dimensions of the bulk modulus of elasticity : Dimensions of the bulk modulus of elasticity are:

What is the number of moles of the helium gas : A balloon is inflated with helium gas to a pressure of 100 kPa gauge. The volume of the balloon is 0.4m^3. The initial temp is 20 degrees C. The helium gas can be treated as an ideal gas. the atmospheric pressure is 101.3 kPa

Determine the power input of the pump : Water enters the pump of a steam power plant as saturated liquit at 20kpa at a rate of 45kg/s and exits at 6mpa. Neglecting KE and PE changes and assuming the process is reversible, determine the power input of the pump

Electric water heater is at an average temperature : Your roommate takes a very long shower, until the water in your 40-gallon electric water heater is at an average temperature of 70 F. The water heater has a rating of 12.5 kW. Assuming no additional water flows from the tank, how long will it take fo..

User Account

All Pages