The light is monochromatic

Assignment Help Mechanical Engineering
Reference no: EM13880437

A slab of intrinsic GaAs, 3cm long, 2cm wide, and 0.3cm thick, is exposed to light. The light is absorbed with an absorption coefficient a=500cm-1 (this means that the light intensity decreases in the material exponentially with distance t, and is proportional to exp(-at)). The light is monochromatic with a wavelength of 750nm and an intensity of 5×10-4W/cm2. (Photon energy (eV) is given by 1.24/wavelength (µm).)

What photon flux is incident on the slab?

 

 

Reference no: EM13880437

Questions Cloud

A liquid leaving a nozzle depends upon the pressure : a) It is observed that the velocity 'V' of a liquid leaving a nozzle depends upon the pressure drop 'P' and its density ρ. Show that the relationship between them is of theform V =C * sq(P/ρ)
Define the experiment the clerk conducted : Define the experiment the clerk conducted. List the experimental outcomes. Assign probabilities to the experimental outcomes. What method did you use?
Briefly describe the problem resulting from the overaging : Answer the following questions. a.) Briefly describe the problem resulting from the overaging of a precipitation hardened alloy. b.) At what temperature does a 5.0wt% Cu-Al alloy completely solidify when slowly cooled from 700oC? c.) What is the maxi..
Ace depreciates assets monthly on a straight line basis : 1.King Cones leased ice cream making equipment from Ace Leasing.
The light is monochromatic : A slab of intrinsic GaAs, 3cm long, 2cm wide, and 0.3cm thick, is exposed to light. The light is absorbed with an absorption coefficient a=500cm-1 (this means that the light intensity decreases in the material exponentially with distance t, and is pr..
Author role and importance within the harlem renaissance : Describes each author's role and importance within the Harlem Renaissance. Identify the elements in each of their poems in which you see evidence of the "double-consciousness" being expressed by each author
Consider the isothermal compression : Consider the isothermal compression of 0.1 moles of an ideal gas at 300 K from (P1=1.5 bar,V1=2 dm3) to (P2=3 bar,V2=1 dm3). The curve illustrates the internal pressure/volume relationship for the ideal gas at 300 K.If the compression of the gas is c..
Ace leasing''s earnings during the eightmonth term : 1.In the situation described in BE 15-30, what is the effect of the lease on Ace Leasing's earnings during the eightmonth term, ignoring taxes?
An adiabatic turbine operates at steady state : An adiabatic turbine operates at steady state. Air enters the turbine at a pressure and temperature of 800kPa and 1100K, respectively, and exits at 100kPa. A temperature sensor at the turbine exit indicates that the exit air temperature is 700K. Kine..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Discuss the effect of pressure ratio on the following

air enters the compressor of an air-standard brayton cycle at 100kpa 300k with a volumetric flow rate of 5m3s. the

  Estimate the temperature in oc to which the block must be

at room temperature 23oc a cylinder of steel has a diameter of 15.02 mm which is too large to fit into a 15 mm diameter

  The performance of a device is defined as the ratio of the

the performance of a device is defined as the ratio of the desired output to the required input and this definition can

  Propose two equipment methods in order of preference to

a new 1.3 m3 tank and ancillary equipment is to be installed in a hygienic food processing plant. the duty is to

  Rigid tank contains water in equilibrium at a temperature

A closed rigid tank contains water in equilibrium at a temperature of 225 °C and a quality of 0.35 (35%). The mass of the liquid water present is 0.25 kg. What phases are present in the system? (Give justification) What is the mass of vapor that is p..

  Determine the speed of sound

Determine the speed of sound at 20 degree C in (a) air, (b) helium, (c) methane. Answer in m/s. also determine the same, using a temperature of 40 degrees Celsius

  Calculate volume in each cylinder when piston reaches tdc

A four-stroke engine has a total displacement volume of 10L, 125mm bore and 16.3:1 compression ratio. The engine produces a maximum of 210 kW at 2100 RPM. The intake air is at 45 degrees C and 22.5 g/s of air flow into each cylinder. Calculate the vo..

  What is the inner tube surface temperature at the outlet

What is the inner tube surface temperature at the outlet, where fully developed conditions may be assumed?

  Actual and design parameter of two stroke petrol engine

what are the actual and design parameter of two stroke petrol engine?

  Consider 25 of austenite containing 065 wt c and cooled to

consider 2.5 of austenite containing 0.65 wt c and cooled to below 727 degrees c.a what is the proeutectoid phase?b how

  Height of 3 in solidifies in 3 minutes in a sand casting

pure aluminum is poured into a sand mold. the metal level in the pouring basin is 10 in. above the metal level in the

  A solid 15-m-diameter sphere floats at the interface

i a solid 1.5-m-diameter sphere floats at the interface between water sg 1.0 and mercury sg 13.56 such that 30

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd