Steam power plant operates on the ideal reheat rankine cycle

Assignment Help Mechanical Engineering

Reference no: EM13702388

A steam power plant operates on the ideal reheat Rankine cycle. Steam enters the high pressure turbine at 6 MPa and 4000C and leaves at 2 MPa. Steam is then reheated at constant pressure to 4000C before it expands to 20 kPa in the low pressure turbine.

Determine the turbine work output in kJ/kg and the thermal efficiency of the cycle.

Reference no: EM13702388

Questions Cloud

Piston–cylinder assembly : Water, initially a saturated liquid at 100 C, is contained in a piston–cylinder assembly. The water undergoes a process to the corresponding saturated vapor state, during which the piston moves freely in the cylinder.

Rate of heat refrigerator receives from the cold storage : It is claimed that a refrigerator requiring 400 W of power (W) receives heat from cold storage (low temperature source, TL) at 200 K and rejects heat at the rate of 600 W (QH) to an environment at 600 K (high temperature reservoir, TH). Calculate the..

Maximum shear stress at the outer surface of the cylinder : A cylinder with a 0.3 m inner diameter and 0.4 m outer diameter is internally pressurized to 140 MPa. Determine the maximum shear stress at the outer surface of the cylinder.

Hemispherical ends is used to transport gas : A 1 m diameter cylindrical container with hemispherical ends is used to transport gas. The internal pressure is 5 MPa and the safety factor is 2. Using the MSST determine the container thickness. The Material is such that E = 200 GPa, Sy = 430 MPa an..

Steam power plant operates on the ideal reheat rankine cycle : A steam power plant operates on the ideal reheat Rankine cycle. Steam enters the high pressure turbine at 6 MPa and 4000C and leaves at 2 MPa. Steam is then reheated at constant pressure to 4000C before it expands to 20 kPa in the low pressure turbin..

Large disparity among the two heat transfer coefficients : Provide 2 separate reasons based on thermo physical properties from the appendices in the back, that together help explain this large disparity among the 2 heat transfer coefficients:

Contained in a piston–cylinder assembly : Water, initially a saturated liquid at 100 C, is contained in a piston–cylinder assembly. The water undergoes a process to the corresponding saturated vapor state, during which the piston moves freely in the cylinder. If the change of state is brough..

Calculate uncertainty in resistance of resultant circuits : Two resistors, R 1 = 100.0 ± 0.2 ? and R2 = 50.0 ± 0.1 ?, are connected (a) in series and (b) in parallel. Calculate the uncertainty in the resistance of the resultant circuits. What is the maximum possible error in each case?

Calculate the exit velocity of the nozzle : Air at 1000K and 400 kPa enters the insulated nozzle of a turbo-jet engine. Because the plane is flying at an altitude, the exit pressure is only 80 kPa. Calculate the exit velocity of the nozzle if its isentropic efficiency is 93%. Report answer in ..

User Account

All Pages